Airflow DUPLEX RS5 3500/1200 Instrukcja montażu - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Centrale wentylacyjne Airflow DUPLEX RS5 3500/1200. Airflow DUPLEX RS5 3500/1200 16 stron. Air-handling units

Drukuj stronę

1. Supply air filter

2. Intake (supply air)

3. Heat recovery core

4. Exhaust (extract air)

5. Exhaust fan

6. Junction box

7. Condensate drain

8. Ceiling-suspension bracket

9. Main switch

10. Exhaust air filter

11. Intake (extract air)

12. Circulation damper

13. Circulation air intake

14. Circulation air filter

15. Cooler

16. Heater

17. Supply and circulation air fan

18. Exhaust (supply and circulation

air)

3.2.

Intended use

DUPLEX 1500/700 to 5500/2000 RS5 are intended for ventilation of civilian and residential buildings

as well as commercial and industrial premises where, besides ventilation, heating or cooling are also

requested. One unit can provide all three functionalities.

DUPLEX RS5 series represent an innovative solution in projects where hot-air heating or cooling is

more advantageous than using traditional solutions such as heating with radiators or locally installed

cooling in the form of air-conditioning (production premises, workshops, repair shops and similar). Be it

the reason that the infrastructure does not provide sufficient power to achieve requested interior

temperature (e.g. floor heating), its operation is not economical or the procurement of the

infrastructure is costly. Units RS5 meet specific interior requirements (premises where absence of

heaters or central heating radiators is requested, e.g. car dealership).

RS5 units meet the requirements of Commission Regulation (EU) No. 1253/2014 (Ecodesign) in the

defined working area.

4 . I n s t a l l a t i o n

4.1.

Safety instructions

●

During installation make sure no damage or deformation is caused to the case of the appliance

(e.g. as a result of handling operations).

●

After setting the appliance in place check it for stability and secure it in this position against

moving.

●

During handling and installation observe all rules of safe work (including work at heights and work

with suspended loads) and use appropriate work and safety equipment.

●

Lifting and binding equipment may only be operated by trained personnel.