Gantom ST133 Podręcznik użytkownika - Strona 2

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Reflektor Gantom ST133. Gantom ST133 15 stron.

POWER AND WIRING REQUIREMENTS

The Storm Form and Storm Form DMX have a maximum wattage of 9.6W and an operating voltage

range of 12-24VDC.

The Storm Form and Storm Form DMX include a single locking connector which combines both power

and data into one compact cable. This connector is compatible with our Gantom Pro Cable System,

including our G8 Power/Data Distribution Box. A single cable for power and data greatly simplifies

installation and the locking connector gives a secure connection for long term use. This makes the

Gantom Pro Cable System ideal for permanent installations. For more information on this system,

please visit https://www.gantom.com/accessories/gantom-pro-cable/

BARE WIRE PINOUT

RED

Power

BLUE

D+

GREEN

DMX signal

D-

YELLOW

COM

BLACK

Note: all fixtures must be installed with the low voltage supply power OFF. Hot

plugging (connecting to a live power supply) is not supported.

Hot plugging a fixture into a system with a running power supply will increase the load on the power

supply, which can generate voltage spikes that more than double of the standard input voltage. This

causes an out-of-spec and out-of-warranty voltage condition which may result in damage to the fixture.

While Gantom fixtures have internal protections against voltage spikes, it is recommended that

installers handle them with care to prevent these spikes from happening in the first place.

Installing all fixtures in the system before turning on power to the low voltage

power supply assures that the power supply has a "soft start" which is free from

harmful voltage spikes.

Storm Form and Storm Form DMX User Guide

Version 1.1 – 2/25/2021