Gantom ST168 Podręcznik użytkownika - Strona 8

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Reflektor Gantom ST168. Gantom ST168 15 stron.

FOCAL ADJUSTMENT

Power on the fixture and remove the barrel by unscrewing it from the middle of the fixture. Be sure to

never look directly at the LED while the fixture is on.

Now, move the primary optic as close to the LED as possible and the secondary optic as far from the LED

as possible on the optic slider rails. You may need to loosen the set screws on the primary and

secondary optics in order to slide them along the rails.

Slowly begin sliding the secondary optic toward the LED until the projected image comes into focus. This

will be the narrowest focused beam the fixture can achieve.

To widen the beam move the primary optic forward about 1 mm, and then move the secondary object

backward along the optic slider rails toward the LED until the beam comes back into focus. Repeat this

Storm Form and Storm Form DMX User Guide

Version 1.1 – 2/25/2021