HIKVISION HiLook Series Podręcznik użytkownika - Strona 6

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Kamera bezpieczeństwa HIKVISION HiLook Series. HIKVISION HiLook Series 13 stron. Smart hybrid light bullet & turret camera
Również dla HIKVISION HiLook Series: Skrócona instrukcja obsługi (18 strony), Podręcznik użytkownika (18 strony), Podręcznik użytkownika (14 strony), Podręcznik użytkownika (20 strony), Podręcznik użytkownika (18 strony), Podręcznik użytkownika (17 strony)

2). Loosen screw A to adjust the tilt position [0° to

180°].

3). Loosen screw B to adjust the rotation position [0°

to 360°].

7. Tighten the trim ring and screws to finish the

installation.

2.1.2 Ceiling/Wall Mounting with Junction Box

Before you start:

You need to purchase a junction box in advance.



Ceiling mounting and wall mounting are similar.



Following steps take wall mounting as an example.

Steps:

1. Paste the drill template for junction box to the place

where you want to install the camera.

(Optional) For cement wall, drill the screw holes

with a 5.5 mm drill and insert the supplied wall

plugs.

Figure 2-4 Drill Template for Junction Box

3. (Optional) Drill the cable hole, when the cables are

routed through the wall.

Take apart the junction box.

Align the screw holes of the camera with those on

the junction box cover. Attach the camera to the

junction box cover with three PM4 × 10 screws.

Figure 2-5 Attach the Camera to the Junction Box Cover

Secure the junction box body on the wall with three

PA4 × 25 screws (supplied).

Figure 2-6 Secure the Junction Box on the Wall

Route the cables through the bottom cable hole or

side cable hole of the junction box and connect the

cables.

Fix the junction box cover on its body with three

PM3 × 16 L6 screws that come with the junction

box.