Airflow 90000520 Instrukcja instalacji i obsługi - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Suszarka Airflow 90000520. Airflow 90000520 5 stron.
Również dla Airflow 90000520: Instrukcja instalacji i obsługi (4 strony)
Drukuj stronę
maintenance of the appliance. It is needed to contact the service in order to restore the brushes at the
end of the cycle.
IMPORTANT:
•
Do not use this product for a function different to which it is intended.
•
Do not expose the appliance to the elements such as rain, sun etc.
•
Do not make any changes to the device.
•
Do not obstruct the air outlet point or air inlet grille.
•
Do not insert any object into the air outlet or air inlet grille.
•
In case of failure/ malfunction, disconnect from the power supply and contact your installer.
This product falls within the competence of the EC Directive 2002/96 (WEEE) on disposal of electrical and
electronic equipment. Complies with RoHS legislation.
Troubleshooting
1. If the dryer continuously blows cold air - please contact Airflow Developments Ltd at
2. The dryer runs continuously – decrease the sensitivity of the activation sensor by turning the
white potentiometer on the board located inside the main body of the dryer (see Fig. 2 below)
clockwise with a pot adjuster/ small screwdriver. Adjust to suit the level of sensitivity required.
3. The dryer does not operate – check all connections, if this fails, please contact your installer.
Please contact Airflow Developments Ltd at
further assistance.
or Tel +44 (0)1494 525 252 for further assistance.
Fig. 2
or Tel +44 (0)1494 525 252 for
Page 4 of 5
80000414 Issue 3 - 07/23