ENGLISH
The oven calculates an approximate end
time. The end time is different for the
different quantities of the food, the set oven
temperatures (minimum 120 °C) and the
operating modes. The oven calculates the
end time in approximately 30 minutes.
6. To change the core temperature, press
.
When the meat is at the set core
temperature, a signal sounds. The oven
turns off automatically.
7. Press any symbol to stop the signal.
8. Remove the core temperature sensor
plug from the socket and remove the
meat from the oven.
9. Press
to turn off the oven.
Warning! The core temperature
sensor is hot. There is a risk of
burns. Be careful when you
remove the tip and the plug of
the core temperature sensor.
Using the telescopic runners
Keep the installation instructions
for the telescopic runners for
future use.
Additional functions
Favourites
You can save your favourite settings, such as
duration, temperature or heating function.
They are available in the menu: Favourites.
You can save 20 programmes.
Saving a programme
1. Turn on the oven.
2. Set a heating function or an automatic
programme.
3. Press
again and again until the
display shows: SAVE.
4. Press
to confirm.
The display shows the first free memory
position.
5. Press
to confirm.
With telescopic runners you can put in and
remove wire shelves and trays easily.
Caution! Do not clean the
telescopic runners in the
dishwasher. Do not lubricate the
telescopic runners.
1
°C
Pull out the right
and left hand
telescopic runners.
Make sure you push back the telescopic
runners fully in the oven before you close
the oven door.
Warning! Refer to "Product
description" chapter.
6. Enter the name of the programme.
The first letter flashes.
7. Use the shuttle to change the letter.
8. Press
.
The next letter flashes.
9. Do step 7 again as necessary.
10. Press and hold
You can overwrite a memory position. When
the display shows the first free memory
position, use the shuttle and press
overwrite an existing programme.
You can change the name of a programme in
the menu: Edit Programme Name.
Activating the programme
1. Turn on the oven.
2
Put the wire shelf on
the telescopic
runners and
carefully push them
into the oven.
to save.
to
21
°C
Drukuj stronę