BRITAX RÖMER BX2000038298 Podręcznik użytkownika - Strona 15

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Fotelik samochodowy BRITAX RÖMER BX2000038298. BRITAX RÖMER BX2000038298 19 stron.

Drukuj stronę
You can remove the following covers and wash them
in the washing machine:
Cover of the seat reducer.
u
Cover of the headrest.
u
Seat cover.
u
Cover of harness buckle.
u
Note the instructions on the cover's washing label.
u
Wash the cover at 30 °C with a mild detergent on the
u
washing machine's fine wash programme.
You can remove the shoulder pads and wash them with
u
like warm soapy water.
You can clean the plastic parts and straps with soapy
u
water.
Do not use strong cleaning agents (such as solvents).
u
6.1.5
Attach cover
Risk of injury due to missing seat cover
The seat cover is an integral safety component of the
child seat. If the seat cover is not used, this may lead to
serious or even fatal injuries.
Never use the child seat without the correct seat
u
cover.
Only use the original Britax Römer replacement seat
u
cover.
Replacement seat covers are available from your re-
u
tailer.
To fit the cover again, follow the steps in the reverse or-
u
der.
Risk of injury due to twisted straps.
Twisted straps have a negative impact on the protective
function.
Ensure that the straps are tight and not twisted.
u
Ensure that the straps are fitted correctly in the belt
u
slots of the cover.
IP10165 | 1.5 | 2000038331
WARNING
WARNING
DUALFIX PRO | BRITAX RÖMER
6.2

Shoulder pads

6.2.1
Remove shoulder pads
1
Shoulder pads
2
Shoulder strap
3
Adjustment button
1. To loosen the belt, press the adjustment button 3 and
pull both shoulder straps 2 forwards at the same time.
The shoulder pads are not connected to the shoul-
der straps. If you pull on the shoulder pads, the
belt is not loosened. Only pull on the shoulder
straps.
2. Undo the shoulder pads 1 at the Velcro on the side.
3. Rotate the seat to the rear-facing position.
4. Open the compartment for the operating manual 6.
5. Pull the ends of the shoulder straps 5 out slightly.
6. Unhook the revealed belt loops of the shoulder pads
from the plastic webs 4.
7. Pull the shoulder pads 1 forwards out of the belt slots.
4
Plastic web
5
End of the shoulder
strap
6
Compartment for op-
erating instructions
15