Ganz VALUE Series Instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Kamera bezpieczeństwa Ganz VALUE Series. Ganz VALUE Series 8 stron. Indoor color camera 24vac/12vdc

Drukuj stronę
Ganz VALUE Series Instrukcja obsługi
Adjusting the DIP Switche Mode
Step 7:
AGC- Automatic Gain Control (suggest ON)
BLC- Back Light Compensation (suggest OFF)
INT- Internal Sync.
D/N- Day and Night Switch (suggest ON)
* Turn on the Day/Night mode; the picture will turn black and white
under 1.5 lux levels. Turn off the Day/Night; the picture will be
always in color.
Step 8:
Loosen the screw to
adjust the tilt angle then
tighten the screw again.
Step 9:
Restore the Inner Dome
Cover.
Step 10: Restore the Camera
Body Cover and then
Top Cover.
TP4*31mm screws and 1/4" * 13/8" plastic anchor are recommended for this
purpose.
Screw
EG-5