Bernee BN-5606H3/M3 series Podręcznik użytkownika - Strona 4
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Aparat cyfrowy Bernee BN-5606H3/M3 series. Bernee BN-5606H3/M3 series 11 stron. Integrated speed dome cameras
Drukuj stronęDOME SPECIFICATIONS
Models
Pan Rotation Range
Pan Speed
Tilt Rotation Range
Tilt Speed
Communication
Preset Positions
Tour routes
Power Supply
Power Consumption
Operation Temperature
Notes:we stress development, parameters upgrade without notification
OPERATION
Fitted cameras:
SONY, CANON, CNB, SAMSUNG
Preparation:
At 8-digit and 6-digit switchers set dome ID, baud rate and control protocol; Connect 485 line and AC wire.
Power-on for self test:
Virgin dome is powered-on, motherboard indicator light flickers fast, then shut, horizontally (pan) rotate 2 circles,
vertical (tilt) rotate and stop at 0°position, till now the motherboard indicator light shines, dome camera enters normal
work state (light flickers every 2 minute).
Control dome full directions rotation:
After selecting one dome, can manually control dome rotation by joystick on keyboard. Joystick lead dome rotating
with three kinds of moving: up-down, left-right, diagonal line
Preset position setting (1#~64#; 101#~255#):
Step by the below:
1) Use keypad input camera number of preset position, press CAMERA to select camera.
2) Operate joystick, zoom button, focus button to adjust image.
3) Input specified preset position number, press SET button to save preset scene parameters.
Call preset positions (1#~64#; 101#~255#):
Keyboard CALL button allows you call out and see preset cameras image. The follow steps show how to view these
preset positions:
1) Use keypad input camera number of the called, press CAMERA button to select camera.
2) Input number of preset position of the called, press CALL button, camera turns to the specialized position. Lens
zoom, focus and iris auto convert to the preset parameters. The image of preset camera displays on monitor.
Long-focus lens and wide angle lens (zoom control):
Zoom-in or zoom-out lens to get featured images or wide-angle images. Hold on pressing TELE button, objects being
closer, object image larger gradually. Hold on pressing WIDE button, objects being farther, object image smaller
gradually.
If you quickly press and release zoom button, monitor image only changes a little. Image changes degree depends on
the lasting time of holding zoom button.
Lens focus control:
Focus is a process of adjusting image clarity. Hold on pressing FAR button, far objects turn clear, and near objects
turn vague. Hold on pressing NEAR button, near objects turn clear, far objects turn vague. Adjust focus buttons until
monitor image turns clear. The same with ZOOM button, focus changes degree depends on the lasting time of holding
focus buttons.
High speed dome
360° random
0.5~300°/s
0~90°; 180° auto flip
0.5~300°/s
RS485
128(255) units
6 defaults routes
AC24V
20W(indoor models) / 40W(outdoor models)
-30~55℃(Indoor Types)/ -30~65℃(Outdoor Types)
Middle speed dome
0.5~180°/s
0~90°
0.5~100°/s
- 2 -