KitchenAid KICU569XSS Instrukcja instalacji - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Płyta grzewcza KitchenAid KICU569XSS. KitchenAid KICU569XSS 16 stron. 30" (76.2 cm) and 36" (91.4 cm) electric
Również dla KitchenAid KICU569XSS: Wymiary produktu (1 strony), Podręcznik wymiarów (8 strony), Instrukcja instalacji (16 strony)

Drukuj stronę

KitchenAid KICU569XSS Instrukcja instalacji

3. Apply the adhesive provided in the kit to the back side of the

brackets.

4. Position brackets in the center of the vertical centerline and

align the upper edge of the brackets so that they are flush

with the countertop.

5. Push the brackets firmly onto each side of the cooktop cutout

and wait 1 hour for adhesive to dry.

1 h

To Install Brackets into Wood Countertop:

1. Measure the center line of the vertical sides of the cooktop

cutout.

2. Position brackets in the center of the vertical centerline and

align the upper edge of the brackets so that they are flush

with the countertop.

Center line

3. Attach the brackets in the cutout with the screws provided.

A. Bracket

B. Screw

Install Cooktop

WARNING

Excessive Weight Hazard

Use two or more people to move and install cooktop.

Failure to do so can result in back or other injury.

1. Using 2 or more people, place the cooktop upside down on a

covered surface using the foam end posts from the

packaging.

2. Remove the foam roll from the package containing literature.

Apply foam adhesive-side down around the bottom of the

cooktop glass.

NOTE: The foam helps avoid damage to the underside of the

cooktop glass from debris and helps the cooktop sit flat on

uneven counters.

A. Cooktop base

B. Foam

C. Assembly glass

3. Lower the cooktop into the cutout with the front end of the

cooktop angled down.