Ganz ZC-DT8312NHA-IR Instrukcja obsługi - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Kamera bezpieczeństwa Ganz ZC-DT8312NHA-IR. Ganz ZC-DT8312NHA-IR 2 stron. Zc-dt8000n-ir series outdoor color camera

Drukuj stronę

INSTALLATION

Surface mount

Flush mount

(embedding in ceiling or wall)

* Mounting

Adaptor Ring

(optional)

* Camera Unit

(Attaching to a gang box)

Use the elastic band to

hang the camera unit

upon necessity for the

installation.

WARNING : Do not

release your hands

from the camera

unit until securing it.

Attention

Please use fixing screws suitable for the material of the ceiling or wall when

attaching the camera body. The mounting screws provided are not recommended

to use at a conditionns.

Surface mount

This section explains how to install the unit where cables are running through the

interior of the ceiling or wall.

1. Drilling holes in the ceiling or wall: Use the template included to mark out the

position on the ceiling or wall where you want to install the unit.

2. When running cables through the interior of the ceiling or wall : Use the template,

and drill two or three holes for screws used to attach the camera body and one hole

for the cables (Cables).

Flush mount

- Embedding in the ceiling or wall

Be sure to use the Mouting Adaptor Ring when embedding the unit in the ceiling or wall

1. Drilling holes in the ceiling or wall : Use the template included to mark out

the position on the ceiling or wall where you want to install the unit.* Use the template,

drill 4 holes for screw used to attache the Mounting Adaptor Ring. Then, follow the

perforations on the template and cut out a hole to embed the camera body.

2. Attaching the Mounting Adaptor ring : Attach the adaptor ring to the ceiling or wall to

which you want to attach the camera body. Please use fixing screws suitable for the

material of the ceiling or wall when attaching the camera body. We recommend using

screws with a 4mm diameter.

3. Attaching the camera body : Remove the surface mount cover from the camera

body. Remove the body cover and attached camera body to the Mounting Adapter Ring.

- Attaching to gangbox

1. Remove the surface mount cover from the camera body.

2. Attaching the camera body : Attach the camera body to the gangbox.

Please use screws that are suitable for the gang box.

(Use breakable holes on the camera body bottom)

ADJUSTMENT

1. Direction and Lens

The camera body is set in a tri-axial mounting allowing movement in the

pan, tilt and rotational planes.

1) Adjust the direction of the lens so it faces the subject

2) Move the lever to adjust focus and angle of view

3) When you finished adjusting the direction of the lens, tighten the locking

screw with a screwdriver.

Attention

he picture image may deteriorate when

the lens is leaned toward ceiling or wall

to view through the circled vertical area

and the effect may depending on the

view angles.

It is not recommended to view through the circledd vertical

area especiallly witth LED light trurned on as the picture

image is subject to a LED light reflection.

Since these image deterionration is normal, installers are

encouraged to check the image under LED-ON environment

at the time of installation in order to avoid unexpected image

deterioration.

2. Dip Switch Mode

ELC

Easy back focus adjustment to maximize the best focusing(refer to attention 1 below)

ELC/ ALC

ALC

Factory set position

Depending on Video signal, Gain is controlled automatically(Factory set position)

AGC

(Auto Gain Control)

OFF

Apply when adjusting the DC Iris Level

Select this position when a strong light is in the back ground.

BLC

(Back Light

Compensation)

OFF

Factory set position

Shutter speed to be fixed at 1/100.(NTSC) 1/120(PAL)(refer to below Attention 2 below)

(Flicker less)

(Factory set * Caution : Never set to ON" in ordinary locations except special mode

OFF

position) location like Tokyo area in Japan etc.

Attention 1

ELC Mode : This mode helps make the focus adjustment easier in the field of

installation. Simply conduct the adjustment in the order of:

- Select ELC mode -Adjust lens focus well - After adjusting, select ALC mode.

* Caution: Never leave ELC ON. Ensure to return to ALC mode after making focus

adjustment.

Attention 2

Setting the Flickerless function to "ON" under low light conditions may reduce the

sensitivity.

CONNECTING the cables

Connect the power and video cables

Connect the video cable from the monitor and the coaxial video cable attached to

the camera body

In case of using DC 12V, connect DC jack from camera with power supply

(CLASS 2 ONLY) If necessary, after connecting DC jack from Camera

to " Additional power connector(Accessory)" connect it with power supply.

In case of using AC 24V, after connecting DC jack from camera to

"Additional power connector(accessory)" connect it with power supply

(CLASS ONLY 2)

Attention

Specification below is recommended as an Output rated capacity of Power supply

that is connected to camera

Input power

12V DC

24V AC

Attention

Be sure to check that the cables are connected correctly before turning on

the power.

Turning on the power when the cables are connected with incorrect polarity

may damage the camera .

English

Disposal of your old appliance

1. When this crossed-out wheeled bin symbol is attached to a product it means the products covered by the European

Directive 2002/96/EC. 2. All electrical and electronic products should be disposed of separately from the municipal waste

stream via designated collection facilities appointed by the government or the local authorities. 3. The correct disposal of

your old appliance will help prevent potential negative consequences for the environment and human health. 4. For more

detailed information

About disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product.

Franç a is/French

Élimination de votre ancien appareil

1. Ce symbole, représentant une poubelle sur roulettes barrée d'une croix, signifie que le produit est couvert par la directive européenne

2002/96/EC. 2. Tous les produits électriques et électroniques doivent être éliminés séparément de la chaîne de collecte municipale des

ordures, par l' intermédiaire des installations de collecte prescrites et désignées par le gouvernement ou les autorités locales. 3. Une

élimination conforme aux instructions aidera à réduire les conséquences negatives et risques éventuels pour ironnement et la santé

humaine. 4. Pour plus d'informations concernant l'élimination de votre ancien appareil, veuillez contacter votre mairie, le service des

ordures ménagères ou encore le magasin où vous avez acheté ce produit.

Deutsch/German

Entsorgung von Altgeräten

1. Wenn dieses Symbol eines durchgestrichenen Abfalleimers auf einem Produkt angebracht ist, unterliegt dieses Produkt der

europäischen Richtlinie 2002/96/EC. 2. Alle Elektro- und Elektronik-Altgeräte müssen getrennt vom Hausmüll über die dafür staatlich

vorgesehenen Stellen entsorgt werden. 3. Mit der ordnungsgemäßen Entsorgung des alten Geräts vermeiden Sie Umweltschäden und

eine Gefährdung der rsönlichen Gesundheit. 4. Weitere Informationen zur Entsorgung des alten Geräts erhalten Sie bei der Stadtverwal-

tung, beim Entsorgungsamt oder in dem Geschäft, wo Sie das Produkt erworben haben.

Italiano/Italian

RAEE: SMALTIMENTO DELLE VOSTRE VECCHIE APPARECCHIATURE

1. Quando il simbolo del "Cassonetto Barrato" è apposto su un prodotto, significa che lo stesso può ricadere nei termini previsti dalla

Direttiva Europea nr. 2002/96/EC in funzione dell'attuazione definita dalla Legislazione dei singoli stati membri dell'Unione Europea. 2.

Tutti i prodotti elettrici ed elettronici dovrebbero essere smaltiti separatamente dai rifiuti municipali, tramite appositi ontenitori, approvati

dall'Amministrazione Comunale o dalle Autorità Locali.

3. Il corretto smaltimento delle vostre vecchie apparecchiature, contribuirà a prevenire possibili conseguenze di impatto egativo sull'

ambiente e per la salute dell'uomo. 4. Per maggiori informazioni circa lo smaltimento delle vostre vecchie apparecchiature, siete pregati di

contattare l'ufficio municipale della vostra città, il servizio di smaltimento rifiuti o il punto vendita nel quale avete acquistato il prodotto.

Polski/Polish

Utylizacja starych urządzeń

1. Kiedy do produktu dołączony jest niniejszy przekreślony symbol kołowego pojemnika na śmieci, oznacza to, że produkt jest objęty

europejską dyrektywą 2002/96/EC. 2. Wszystkie elektryczne i elektroniczne produkty powinny być utylizowane niezależnie od odpadów

miejskich, zwykorzystaniem przeznaczonych do tego miejsc składowaniawskazanych przez rząd lub miejscowe władze. 3. Właściwy

sposób utylizacji starego urządzenia pomoże zapobiec potencjalnie negatywnemu wpływowi na zdrowie i środowisko. 4. Aby uzyskać

więcej informacji o sposobach utylizacji starych urządzeń, należy skontaktować się z władzami lokalnymi, przedsiębiorstwem zajmującym

się utylizacją odpadów lub sklepem, w którym produkt zostałkupiony.

Português/Portuguese

Eliminação do seu antigo aparelho

1. Quando este símbolo de latão cruzado estiver afixado a um produto, significa que o produto é abrangido pela Directiva Europeia

002/96/EC. 2. Todos os produtos eléctricos e electrónicos devem ser eliminados separadamente da coleta de lixo municipal através de

pontos de recolha designados, facilitados pelo governo ou autoridades locais. 3. A eliminação correcta do seu aparelho antigo ajuda a

evitar potenciais onsequências negativas para o ambiente e para a saúde humana. 4. Para obter informaçõs mais detalhadas acerca da

eliminação do seu aparelho antigo, contacte as autoridades locais, um service de eliminação de resíduos ou a loja onde comprou o

produto.

Español/Spanish

Cómo deshacerse de aparatos eléctricos y electrónicos viejos

1. Si en un producto aparece el símbolo de un contenedor de basura tachado, significa que éste se acoge a la Directiva 2002/96/EC.2.

Todos los aparatos eléctricos o electrónicos se deben desechar de forma distinta del servicio municipal de recogida de basura, a través

de puntos de recogida designados por el gobierno o las autoridades locales. 3. La correcta recogida y tratamiento de los dispositivos

inservibles contribuye a evitar riesgos potenciales para el medio ambiente y la salud pública. 4. Para obtener más información sobre

cómo deshacerse de sus aparatos eléctricos y electrónicos viejos, póngase en contacto con su ayuntamiento, el servicio de recogida de

basuras o el establecimiento donde adquirió el producto.

Voltage

Current

12V DC±10%

600mA±10%

24V AC±10%

400mA±10%

CBC Co.,Ltd

Tokyo, Japan