Avantco 178APT27 Podręcznik użytkownika - Strona 2

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Lodówka Avantco 178APT27. Avantco 178APT27 10 stron. Commercial refrigerator and freezer

User Manual

Installation

Important!!! Please Read Before Installation

• If the unit has recently been transported on its side, please let unit stand still for a minimum of 24

hours before plugging it in.

• Make sure that the unit drops down to desired temperature before loading the unit with product.

• Make sure that there is proper ventilation around the unit in the area where it will operate.

• Make sure all accessories are installed (i.e.. Shelves, shelf clips, casters) before plugging the unit in.

• Please read through the manual in its entirety.

Cabinet Location Guidelines

• Install the unit on strong and leveled surfaces

- Unit may be noisy if surface is uneven.

- Unit may malfunction if surface is uneven.

• Install the unit in an indoor, well-ventilated area

- Unit performs more efficiently in a well-ventilated area.

- For best performance, please maintain clearance of 4" on the back of the unit. Brackets should be attached on the

back of the unit.

- Outdoor use may cause decreased efficiency and damage to the unit.

• Avoid installation in a high humidity and/or dusty area

- Humidity could cause unit to rust and decrease efficiency of the unit.

- Dust collected on condenser coil will cause unit to malfunction.

- Malfunction due to dirty condenser will void warranty.

• Select a location away from heat and moisture-generating equipment

- High ambient temperatures will cause the compressor to overwork, leading to higher energy bills and gradual

breakdown of the unit. With the lid open, the unit should not be used in areas over 80 degrees. The unit should not

be used in areas over 90 degrees.

- Malfunction due to high ambient temperature will void warranty.

Electrical

• Please ensure that the required voltage of the compressor is being supplied at all times. Low or

high voltage can detrimentally affect the refrigeration unit.

• All units should be plugged into a grounded and properly-sized electrical outlet with appropriate

overcurrent protection. Please refer to the electrical requirements on the nameplate.

• Please make sure that your unit has its own dedicated outlet.

• Do not use an extension cord.

- 2 -