Avantco 178SSWD3R Podręcznik użytkownika - Strona 6

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Lodówka Avantco 178SSWD3R. Avantco 178SSWD3R 10 stron.

User Manual

Freezer Control

Refrigerator Control

Prg

aux

mute

set

Set

def

Loading Product

Before loading shelves, please be sure that all shelf clips are completely fastened in their correct

locations. It is important that all shelves rest completely level before stocking your cabinet with product.

In order to maintain correct air flow inside the unit, please be sure to leave two to four (2 to 4) inches

of space between the back wall and stored product. Blocking the evaporator fans will result in a

warmer cabinet temperature, and ultimately compressor failure.

Running a Manual Defrost Cycle

This unit is pre-programmed to run automatic defrost cycles at preset intervals. However, if you

would like to run a manual defrost cycle at any time, please follow the steps below:

Freezers: Press the defrost button ("def" and down arrow) for approximately 5 seconds. Repeat to

stop the defrost cycle.

Refrigerators: Press the defrost button (snowflake symbol and down arrow) for approximately 3

seconds. Repeat to stop the defrost cycle.

Refrigerator coils are kept below the freezing point (32° F). During compressor down-time, the

evaporator fan continues to circulate air through the evaporator coil. This air circulation raises the coil

temperature above the freezing point, melting any accumulated frost. Run-off water is drained into

the evaporator pan and evaporated. Freezer coils are defrosted electrically. Automatic defrost timers

automatically initiate at pre-set intervals and for a pre-determined duration.

Loading Food Pans

Pizza prep units and sandwich prep units are designed to function with all pans in place, even if

some pans are to be left empty. For maximum food freshness, fill the pans only with an amount that

can be used in a specific usage period. During non-use, please close the insulated lid cover.

- 6 -