Ganz ZN-MD2xx Series Skrócona instrukcja obsługi - Strona 2

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Kamera bezpieczeństwa Ganz ZN-MD2xx Series. Ganz ZN-MD2xx Series 3 stron.

Quick User Guide

1. Control Button

-Change Video output format NTSC/PAL. (toggle)

-Factory Default (Keep hold more than 10 seconds)

2. Network LED

3. Status LED

4. Reset Button

5. Video output for service monitor

6. Lock nut

7. Focus adjustment

8. Network (RJ-45 PoE required)

3. Making Connection

Connect Ethernet cable to make a connection to the POE HUB.

The camera support POE only.

4. Assign IP address

The default setting of the camera is set to "DHCP" and "UPnP" function is

set to ON. If you have a DHCP server on your network and UPnP function is

enabled on your PC you can find the network camera in "My network".

If a DHCP server is not available on your network, please assign IP address

by the following process.

Execute PixelPro_Discovery_Tool.exe. It will search cameras on the network

automatically.

1) After the camera is listed in camera list, select the camera.

2) Type in the all network information.

3) Click "Apply" button

Then double click the camera in the list, Internet explorer will open

automatically.

ZN-MD2xx Series Network Camera

3. Connect power cable to the camera.

When you use PoE function, you don't

need to connect power.

Ver1.00 EN