Ganz digimaster DR-16FX2 Instrukcja instalacji - Strona 11
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla DVR Ganz digimaster DR-16FX2. Ganz digimaster DR-16FX2 17 stron. Digimaster series 4ch;8ch;16ch
Drukuj stronę
For 8/16 channel models
1.
Remove the screw from each the bracket
on the Bottom side of the DVR.
2.
Hold the HDD bracket with your finger as
shown in the figure and pull it to separate
it from the DVR.
3.
Install the HDD on the bracket and fix it by
fastening 4 screws on its sides.
When installing HDD, make sure to install
in the correct direction.
4.
Insert back the bracket installed with the
HDD into the DVR.
5.
Fix the bracket by fastening the screw.
INSTALLATION
１１