Ganz DIGIMASTER SERIES Instrukcja instalacji - Strona 13
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla DVR Ganz DIGIMASTER SERIES. Ganz DIGIMASTER SERIES 18 stron. 8ch / 16ch digital video recorder 960 h
Również dla Ganz DIGIMASTER SERIES: Instrukcja instalacji (18 strony)
Drukuj stronę
Connecting to an external device
Connecting to the monitor
This product supports HDMI monitors and regular monitors that support VGA inputs.
Once the product is set for NTSC or PAL output, connect cameras of
the corresponding video standard for proper operations.
Setting the product to NTSC or PAL decides available display output
modes too.
The monitor's displaying operates at 50Hz if the product has been set to PAL output
and the connected monitor supports both 50Hz and 60 Hz inputs. For NTSC setting, it
works at 60Hz.
Make sure to connect the product to a monitor that supports 1920x1080, 1270x1024 or
1280x720.
Power Connection
Connect the power cable supplied with the product into the power socket on the main unit's
rear side.
Make connection when the power is not applied yet.
Arrange up the cables and be careful not to peel off the cable coating.
Do not place the power cord under the carpet or rug. The power cord is usually earth-
grounded. However, even if it's not earth-grounded, do never modify it on your own for
earth-grounding.
Do not insert multiple devices in a single power socket. Otherwise, it may cause a power
overload.
INSTALLATION
１３