Decor Star PL-037-SS Podręcznik - Strona 9

Przeglądaj online lub pobierz pdf Podręcznik dla Armatura łazienkowa Decor Star PL-037-SS. Decor Star PL-037-SS 11 stron.

Installation (cont.)

6. Apply thread sealant tape to the

threading on the shut off valves before

connect both hot and cold water supply

hoses to the valves.

IMPORTANT :

- Make sure the water supply hoses are

connected to the corresponding valves -

i.e. cold water hose to the cold water valve

and the same for hot water hose. The

mixing valve will not function properly if the

hoses are installed incorrectly.

- Before hanging the shower panel on

the wall. Turn on both valves and test all

functions on the shower panel and check

for leaks at this point. You should have

good water flow to the shower panel and

full temperature control from the knobs.

7. Once the shower panel has been tested

for functions and leaks. Hang the unit on

the wall to complete the installation. Due to

the limited space behind the shower panel,

do not bend the hoses. Any restrictions in

the water supply hoses will greatly reduce

the performance of the shower panel. After

the shower panel is set properly on the

wall, apply silicon sealant on both sides of

the shower panel to prevent the unit from

moving.

(NOTE: Do not seal the bottom of the

panel.)

Decor Star

PL-037-SS Rev. A2 102017