HIKVISION TURBO HD H1T Series Podręcznik użytkownika - Strona 4
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Kamera bezpieczeństwa HIKVISION TURBO HD H1T Series. HIKVISION TURBO HD H1T Series 15 stron. Bullet camera
Również dla HIKVISION TURBO HD H1T Series: Podręcznik użytkownika (15 strony), Podręcznik użytkownika (15 strony)
Drukuj stronę
Do not aim the camera at the sun or extra bright
places. Blooming or smearing may occur otherwise
(which is not a malfunction), and affect the
endurance of sensor at the same time.
The sensor may be burned out by a laser beam, so
when any laser equipment is in using, make sure that
the surface of sensor will not be exposed to the laser
beam.
Do not place the camera in extremely hot, cold, dusty
or damp locations, and do not expose it to high
electromagnetic radiation.
To avoid heat accumulation, good ventilation is
required for operating environment.
Keep the camera away from liquid while in use.
While in delivery, the camera shall be packed in its
original packing, or packing of the same texture.
1 Introduction
1.1 Product Features
The camera is applicable for both indoor and outdoor
conditions, and the application scenarios include road,
warehouse, underground parking lot, bar, etc..
The main features are as follows:
High performance CMOS sensor
Low illumination, 0.01 Lux @ (F1.2, AGC ON), 0 Lux
with IR
IR cut filter with auto switch
OSD menu with configurable parameters
Auto white balance
internal synchronization
SMART IR mode
3-axis adjustment
Overview
1.2
Note:
The cables of device vary according to different
models. The cables of each type are shown in the
figures below, refer to the actual sample.
You can debug the camera by connecting an
auxiliary HD TVI cable to the auxiliary video output.
1.2.1 Overview of Type I Camera
Bracket
Cables
Auxiliary Video
Output
Menu Button
Figure 1-1 Overview of Type I Camera
Main Body
Lens
Photoresistor
24 VAC/12 VDC
Power Cord
Video Cable
Model I Cables
12 VDC
Power Cord
Video Cable
Model II Cables