KitchenAid KD-21A SERIES Instrukcja instalacji - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Zmywarka KitchenAid KD-21A SERIES. KitchenAid KD-21A SERIES 16 stron.

To maintain dishwasher

position and alignment,

locate the adjustable brackets at the upper tank corners as shown

in Fig. 13 and secure them to the counter top with self drilling flat head wood screws (supplied).

CAUTION :Make

sure screw heads will not interfere with the top of the door.

If these brackets are not compatible

with your

countertop,

the dishwasher

may be anchored to the floor with a VI" lag bolt (not supplied) through the hole in

each side of the dishwasher

frame as shown in Fig. 12.

Fig.

CONNECTING THE WATER SUPPLY LINE

The water supply line should be flushed to clear any foreign material BEFORE connecting

to dishwasher.

Make sure there are no sharp bends or kinks which might restrict water flow.

To facilitate connection

of the water line from the rear of the dishwasher,

it is recommended

that a j/a" NPT street

elbow be connected to the fill valve and a 90° compression

elbow (3/8" NPT one end) be connected to the street

elbow. The supply line can then be connected to the compression

elbow (see Fig. 14).

NOTE:

If galvanized

pipe

is used, substitute

a second 3/8" street elbow for the compression

elbow.

Turn on water supply and check for leaks.

Compression

Sleeve

l/Z"

00 copper

wIl,er

llfw

(3/S"

NPT one end)

Fig.

-lO-