HIKVISION TURBO HD U7T Series Podręcznik użytkownika - Strona 6
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Kamera bezpieczeństwa HIKVISION TURBO HD U7T Series. HIKVISION TURBO HD U7T Series 15 stron. Turret & dome camera
Również dla HIKVISION TURBO HD U7T Series: Podręcznik użytkownika (15 strony), Podręcznik użytkownika (15 strony)
Drukuj stronę
3. Paste the drill template (supplied) to the place where
you want to install the camera.
4. Drill the screw holes and the cable hole (optional) on
the ceiling/wall according to the drill template.
Note:
Drill the cable hole, when adopting the ceiling outlet
to route the cable
5. Attach the mounting base to the ceiling/wall, and
secure them with supplied screws.
Figure 2-3 Attach the Mounting Base to the Ceiling
Note:
The supplied screw package contains self-tapping
screws, and expansion bolts.
For cement wall/ceiling, expansion bolts are required
to fix the camera. For wooden wall/ceiling, self-
tapping screws are required.
6. Route the cables through the cable hole, or the side
opening.
7. Install the camera to the mounting base, and tighten
the screws to secure it on the mounting base.
Figure 2-4 Install the Camera to the Mounting Base
8. Connect the corresponding cables, such as power
cord, and video cable.
9. Power on the camera to check whether the image on
the monitor is gotten from the optimum angle. If not,
adjust the camera according to the figure below to get
an optimum angle.
Figure 2-2 Drill Template
.
Expansion Bolts
Self-tapping Screws