HIKVISION TurboHD H0T Series Podręcznik użytkownika - Strona 5

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Kamera bezpieczeństwa HIKVISION TurboHD H0T Series. HIKVISION TurboHD H0T Series 15 stron. Turbo hd bullet & dome camera
Również dla HIKVISION TurboHD H0T Series: Podręcznik użytkownika (17 strony), Podręcznik użytkownika (16 strony), Podręcznik użytkownika (17 strony), Podręcznik użytkownika (13 strony), Podręcznik użytkownika (18 strony), Podręcznik użytkownika (15 strony), Podręcznik użytkownika (17 strony)

Drukuj stronę
HIKVISION TurboHD H0T Series Podręcznik użytkownika

2 Installation

Before you start:
Make sure that the device in the package is in good
condition and all the assembly parts are included.
Make sure that all the related equipment is power-off
during the installation.
Check the specification of the products for the
installation environment.
Check whether the power supply is matched with
your power output to avoid the damage.
Make sure the wall is strong enough to withstand
three times the weight of the camera and the
bracket.
If the wall is cement, insert expansion bolts before
installing the camera. If the wall is wooden, use
self-tapping screws to secure the camera.
If the product does not function properly, contact
your dealer or the nearest service center. Do NOT
disassemble the camera for repair or maintenance by
yourself.
2.1 Installation of Type I Camera
2.1.1 Ceiling/Wall Mounting without Junction Box
Steps:
1. Paste the drill template (supplied) to the place
where you want to install the camera.
2. Drill the screw holes and the cable hole (optional) in
the ceiling/wall according to the drill template.
Note:
Drill the cable hole, when adopting the ceiling outlet
to route the cable.
3. Attach the bracket to the ceiling/wall and secure the
camera with supplied screws.
Figure 2-2 Fix the Camera to the Ceiling
Note:
The supplied screw package contains self-tapping
screws, and expansion bolts.
For cement wall/ceiling, expansion bolts are
required to fix the camera. For wooden
wall/ceiling, self-tapping screws are required.
4. Route the cables through the cable hole, or the side
opening.
Figure 2-1 Drill Template