KitchenAid KDFX 6030 Karta produktu - Strona 14
Przeglądaj online lub pobierz pdf Karta produktu dla Zmywarka KitchenAid KDFX 6030. KitchenAid KDFX 6030 16 stron.
Drukuj stronę
What to do if...
If a fault occurs, before contacting the After-sales Service, make the following checks to try and remedy
the problem. Most faults can be remedied by taking the following courses of action, quickly restoring
normal appliance operation.
The appliance...
...is not working/will not
start
... shows "F1" on the
display or the START
indicator lamp flashes
once
... shows "F4" on the
display or the START
indicator lamp flashes 4
times
... shows "F6" on the
display or the START
indicator lamp flashes 6
times
... shows "F7" on the
display or the START
indicator lamp flashes 7
times
... shows "F8" on the
display or the START
indicator lamp flashes 8
times
... shows other "F" faults
on the display or the
START indicator lamp
flashes Xx times
After taking the above course of action, the fault message must be reset. In the majority of
cases the fault is thus eliminated.
RESET:
• Press the START button for approx. 2 seconds until the indicator lamp switches off or press the RESET
button (depending on model).
• Close the door.
• Water drains automatically for up to 60 seconds.
• The appliance is now ready to be restarted.
Possible causes/solutions
- The appliance must be switched on.
- Check the household circuit fuse if there is no power supply.
- The dishwasher door must be closed.
- Check whether the "Delayed start" function (if available) has been
selected. If it has, the appliance will only start once the set time has
elapsed. If necessary, set the delayed start to "0" (RESET the appliance).
- The water supply temperature must be above 3°C.
- The filters must not be dirty or clogged.
- The drain hose must not be kinked.
- The closure disk of the syphon hose connection must be removed.
- The water tap must be open.
- The water inlet hose must not be kinked and the relative inlet filter in
the water tap connector must not be clogged.
- The water tap must be fully open during water inlet (minimum capacity:
0.5 litres per minute).
- The water inlet hose must not be kinked and the relative inlet filter in
the water tap connector must not be dirty.
- The filters must not be dirty or clogged.
- Concave items (e.g. bowls, cups) must be arranged facing downwards
in the rack.
- The drain hose must be fitted correctly (for high built-in appliances,
leave min. 200-400 mm from the lower edge of the appliance - see
instructions in "Maintenance and Installation").
- Reset the appliance (see below).
14