Ganz PixelPro GXi Series Instrukcja instalacji - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Konwerter mediów Ganz PixelPro GXi Series. Ganz PixelPro GXi Series 18 stron. H.264 video encoder

Drukuj stronę
PixelPro GXi Series

4. INSTALLATION

4.1.Connectors

Video connection
Connect the camera to the video input connectors on the back panel using 75 ohm video
coaxial cables with a BNC connector. Each of the connected video input channel can be looped
to other equipment (e.g. CRT monitor) through external video output connector.
Audio connection
Connect to the audio input device such as a microphone.
Aout
Ain
Sensor Input (D/I)
There are two sensor interface types – Voltage Type and Relay Type. The interface type can be
controlled by the software. Before connecting sensors, check driving voltage and output signal
type of the sensor. Since the connection is different according to sensor type, be careful to
connect the sensor.
Internal
st
1
Module
ND
2
Module
rd
3
Module
st
4
Module
Relay Type
10-2013-A
Speaker
Mic
+3.3V
Output of
Sensor 1
DI 1
+
-
+3.3V
Output of
Sensor 2
DI 2
+
-
+3.3V
Output of
Sensor 3
DI 3
+
-
+3.3V
Output of
Sensor 4
DI 4
+
-
COM
ZS1-4DB1 Installation Guide
Internal
st
1
Module
ND
2
Module
rd
3
Module
st
4
Module
Voltage Type
Output of
Sensor 1
DI 1
+
-
Output of
Sensor 2
DI 2
+
-
Output of
Sensor 3
DI 3
+
-
Output of
Sensor 4
DI 4
+
-
COM
+
-
+5VDC
8