Ganz ZN-S1000VE Instrukcja szybkiej instalacji - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja szybkiej instalacji dla Konwerter mediów Ganz ZN-S1000VE. Ganz ZN-S1000VE 5 stron. 1ch h.264 encoder

Advanced setup (ZNS-GIT IPAdmin Tool)

ZNS‐GIT IPAdmin Tool is a utility program for IP products. Following list shows a part of features that ZNS‐GIT

IPAdmin Tool provides.

Configure IP address, Subnet mask and Gateway

Shows network related information such as MAC address

Updates firmware

Reboots the device

ZNS‐GIT IPAdmin Tool is provided with SDK at the following SDK path.

{SDK root}\BIN\TOOLS\AdminTool\

Rebooting

Reset can be carried out as follows:

1. While the device is in use, press and hold the Reset.

2. Release the Reset button after 3 seconds.

3. Wait for the system to reboot.

Resetting to the Factory Default Settings

This will reset all parameters, including the IP address, to the Factory Default initialization.

To perform the Factory Default settings:

1. Disconnect the power supply from the device.

2. Connect the power to the device with the Reset button pressed and held.

3. Release the Reset button after 5 seconds.

4. Wait for the system to reboot.

To learn more about using other features of your devices, refer to the manual, which is available on the SDK at

the following path.

{SDK root}\DOC\

2010/2‐1