Ganz PixelMASTER GXi Series Skrócona instrukcja obsługi - Strona 2

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Sprzęt sieciowy Ganz PixelMASTER GXi Series. Ganz PixelMASTER GXi Series 6 stron.

⑪

Sensor input

Camera Connection

⑫

Relay / RS-

485

⑬

DC Adaptor

-Auto(using the PoE Port) Mode-

To two ways to connect to NVR camera.

Case 1. As shown above, can be connected to PoE ports. (up

to 8ch)

Without a separate set of cameras can operate in NVR.

Automatically to connect the network video recorder after

setting the IP address.

For further information, please refer to the manual.

-Manual(Using the local or ethernet ports) Mode-

Case 2. As shown above, it the camera and the recorder

when is connected to the same hub is to connect.

Separate camera settings are required.

From 9 to 16 channel is used to connect.

For further information, please refer to the manual.

When you turn on at first time you can see the below menu.

SYSTEM LANGUAGE: Select the system language.

SYSTEM TIMEZONE: Select the system time-zone.

DATE FORMAT: Select the date format

VIDEO SIGNAL FORMAT: Select the video signal type

VIDEO OUTPUT RESOLUTION: Select the video output

resolution

-START SETUP-