Berner AI10 Instrukcja instalacji i konserwacji - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja instalacji i konserwacji dla Grzałka Berner AI10. Berner AI10 16 stron. Architectural icon air curtain

QUICK START INSTRUCTIONS

For your Berner Air Curtain with Intelliswitch™ Gen4

NOTE – to navigate, use

use

to change setting,

then press

Stop: Immediately stops the air curtain and changes mode to OFF

"i": info button provides controller status and diagnostic data

Mode/Fan Speed:

Mode: Select your mode of operation (see next page)

Fan Speed: Sets the fan speed

Delay Time: Sets the amount of time the air curtain runs after the door closes

Temp Set: Sets the temperature the air curtain will maintain (heated units only)

Start Time: Programs the time of day the air curtain becomes active

Stop Time: Programs the time of day the air curtain stops running

Set Time/Day: Sets the clock time and day (used by programming)

Locked: Unit will run as programmed but settings cannot be changed

NOTE: Start/Stop time must be the same for the air curtain to operate continuously.

If your air curtain unit is in "Locked" mode when you receive it:

Press and hold the

www.berner.com

www.Berner.com/intelliswitch

to select setting

to enter the setting.

IMPORTANT NOTE!

for 5 seconds to unlock.

Berner International

111 Progress Ave. / New Castle / PA / 16101 / USA

-10-

800.245.4455