IKEA Strala Instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Oświetlenie domowe IKEA Strala. IKEA Strala 20 stron. Light chain
Również dla IKEA Strala: Podręcznik użytkownika (12 strony), Podręcznik (9 strony), Podręcznik (13 strony), Podręcznik (16 strony), Podręcznik (20 strony), Podręcznik (16 strony), Podręcznik (32 strony), Podręcznik (28 strony), Podręcznik (20 strony), Skrócona instrukcja obsługi (16 strony), Podręcznik (12 strony), Skrócona instrukcja obsługi (12 strony), Podręcznik (20 strony), Podręcznik (20 strony), Podręcznik (12 strony), Podręcznik (24 strony), Podręcznik (12 strony), Podręcznik (20 strony), Skrócona instrukcja obsługi (8 strony), Podręcznik (13 strony), Podręcznik (12 strony), Podręcznik (12 strony), Podręcznik (12 strony), Podręcznik (16 strony), Podręcznik (12 strony), Skrócona instrukcja obsługi (12 strony), Podręcznik (12 strony), Podręcznik (36 strony), Podręcznik (8 strony), Podręcznik (12 strony), Podręcznik (8 strony), Podręcznik (12 strony), Podręcznik (24 strony), Instrukcja obsługi (40 strony), Podręcznik (24 strony), Podręcznik (28 strony), Skrócona instrukcja obsługi (4 strony)

Drukuj stronę
IKEA Strala Instrukcja obsługi
ENGLISH

Visual inspections

New Seasonal and Holiday lighting
sets should be checked and inspected
in accordance with the manufactur-
er's instructions provided with the
set.
Don't throw away the box, keep it to
store the lighting sets in, it may have
information on buying replacement
lamps.
Older sets, which may have been
hurriedly dismantled following the
previous year's festivities and stored
for 12 months, need to be carefully
checked for any damage to the lamps
(light bulbs), lampholders and con-
ductors (wires).
The following are examples of items
that should be checked before plug-
ging in the set to the mains.

The flexible cable and lampholders:

is the cable in good condition?
is it free from cuts, fraying and dam-
age?
are the connections at each lamphold-
er sound?
are the lampholders free from cracks
or damage, that might give access to
the live cable or live contacts of the
lamps?
The lamps:
are they all in place, undamaged,
properly screwed or pushed in?

The plug/transformer

Check that the plug is not damaged.
Look for signs of overheating.
Check the fuse (if any), make sure it is
the correct rating.
IF ANY DOUBT, HAVE THE SET
CHECKED BY A QUALIFIED ELECTRI-
CIAN BEFORE USE OR SCRAP AND
PURCHASE A NEW SET.
Where the set is intended to be
connected to the supply via a 'plug-in
transformer', only use the transform-
er supplied with the set. Otherwise if
the output voltage does not match the
voltage of the lamps overheating may
result.

Functional Tests

After the visual inspection and cor-
recting any faults found, including
tightening of lamps and replacement
of broken or missing lamps, plug in
and switch on the lamp set. Replace
any faulty lamps with ones of the
same voltage rating and manufacture,
check the box for details. Spare lamps
are usually provided with the set.
Lamps should not be removed or
installed with the supply on.
Only replace 'fused' lamps (some-
times identified by a white mark
on the glass) with identical 'fused'
lamps.
5