GREEN SERIES FITNESS 6000 Upright Programowanie Manualline - Strona 2
Przeglądaj online lub pobierz pdf Programowanie Manualline dla Bieżnia GREEN SERIES FITNESS 6000 Upright. GREEN SERIES FITNESS 6000 Upright 3 stron. Elevation error reprogramming
Drukuj stronę
Pull out the safety key, press [Stop] +
[Incline Up] then put back the safety
key to enter mode.
Max incline display: Message window
show "MAX INCLINE XX" , press [Incline
Up] or [Incline Down] to set, set range=
12 to 15, then press [Enter] to confirm
and go to the next setting.
Service Mode #6:
Incline Test & Settings
Message window show "MANUAL INC
XXX" , press [Incline Up] or [Incline Down]
can be control incline motor manually,
press [Enter] to next setting. Note: If this
does not raise or lower the elevation go
directly to Component Replacement guide
or call Green Series Fitness Customer
Support
Max incline parameter: Message window
show "MAX AD OOO XXX" ,OOO=old setting
memory value, XXX=real time incline
position parameter. Reading should read
"MAX AD 195 15 " Last number can very 14-
17.