IKEA DISKAD Instrukcja obsługi - Strona 48
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Zmywarka IKEA DISKAD. IKEA DISKAD 50 stron.
Również dla IKEA DISKAD: Podręcznik (36 strony), Podręcznik (16 strony), Podręcznik (45 strony), Podręcznik (37 strony)
![IKEA DISKAD Instrukcja obsługi](/uploads/products/server2/2082879/2082879.jpg)
en Installation and connection
Warm water connection*
* depending on the configuration of
H o t w a t e r c o n n e c t i o n
your specific dishwasher
The dishwasher can be connected to
cold or hot water up to max. 60°C.
Connection to hot water is
recommended if the hot water can be
supplied by energetically favourable
means and from a suitable installation,
e.g. solar heating system with
circulation line. This will save energy
and time. The hot water setting :
allows you to adjust your appliance
optimally to operation with hot water. It
is recommended to have a water
temperature (temperature of the
incoming water) of at least 40 °C and
no more than 60 °C. It is not
recommended to connect the appliance
to hot water if the water is supplied from
an electric boiler.
Here's how to change the hot water
setting:
Switch on ON/OFF switch (.
1.
Hold down the programme button
2.
# and then repeatedly press the
START button ` until : ...
appears in the display window.
Release both buttons.
3.
The LED of the # button flashes
and the digital display h lights up
to show the value : ....
Press the programme button #
4.
repeatedly until the factory setting
value :
appears in the display
window h.
By pressing the 3 button, you can
5.
switch the hot water setting off :
or on :
.
Press START button `.
6.
The set value is saved.
48
Electrical connection
Connect the appliance to an
alternating current only, ranging from
220 V to 240 V and 50 Hz or 60 Hz
via a correctly installed socket with
protective earth conductor. See
rating plate for required fusing 9J.
The socket must be near the
appliance and freely accessible
following installation.
If the plug is not freely accessible, an
allpole disconnector with a contact
opening of at least 3 mm must be
fitted on the installation side to
satisfy the relevant safety
instructions.
The connection may be modified
by technicians only.
A power cord extension may be
purchased from customer service
only.
The appliance features a water
damage protection system. Please
note the system will function only
when the power supply
is connected.