IKEA ENASTAENDE Podręcznik użytkownika - Strona 8
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Zmywarka IKEA ENASTAENDE. IKEA ENASTAENDE 24 stron. Enastående
Drukuj stronę
ENGLISH
1)
Programme
4
5
6
1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of
dishes can change the programme duration and the consumption values.
Information for test institutes
For all the necessary information for test performance. send an email to:
Write down the product number (PNC) that is on the rating plate.
Options
Activate or deactivate the options be-
fore the start of a programme. You
cannot activate or deactivate the options
while a programme operates.
If one or more options are set, make
sure that the related indicators are on
before the programme starts.
Energy Saver
This option decreases the temperature in
the drying phase. The energy consumption
decreases by 25%.
The dishes can be wet at the end of the
programme.
Press the Energy Saver button:
• If the option is applicable to the pro-
gramme, the related indicator comes on.
• If the option is not applicable to the pro-
gramme, the related indicator flashes for
some seconds and then stays off.
Multitab
Activate this option only when you use the
combi detergent tablets.
This option deactivates the flow of rinse aid
and salt. The related indicators are off.
The programme duration can increase.
• Press the multitab button, the related in-
dicator comes on.
Duration
(min)
165 - 175
70 - 80
14
Energy
(kWh)
0.9 - 1.0
0.8 - 0.9
0.1
• The option stays on until you deactivate
it. Press the multitab button, the related
indicator goes off.
If you stop to use the combi detergent
tablets, before you start to use separately
detergent, rinse aid and dishwasher salt,
do these steps:
1. Deactivate the multitab option.
2. Set the water softener to the highest lev-
el.
3. Make sure that the salt container and
the rinse aid dispenser are full.
4. Start the shortest programme with a
rinsing phase, without detergent and
without dishes.
5. Adjust the water softener to the water
hardness in your area.
6. Adjust the released quantity of rinse aid.
Acoustic signals
The acoustic signals operate in these condi-
tions:
• The programme is completed.
• The level of the water softener is adjusted
electronically.
• The appliance has a malfunction.
Factory setting: on. You can deactivate
the acoustic signals.
Water
(l)
9 - 11
11 - 12
4
8