IKEA IUD9500WX0 Instrukcja instalacji - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Zmywarka IKEA IUD9500WX0. IKEA IUD9500WX0 44 stron. Undercounter dishwasher plastic giant tub models
Również dla IKEA IUD9500WX0: Instrukcje użytkownika (25 strony)
Drukuj stronę
4. Insert drain hose through hole cut in cabinet to the front center
of opening where drain connection will be made.
L
A
A. Drain hose
**Parts available from local plumbing supply stores.
Option 3: Waste Disposer
- no air gap
1. Remove the disposer knockout plug. Do not cut end of drain
hose.
2.
Attach drain hose to disposer inlet with large springtype
clamp.
This connection must be before the drain trap and at least 20"
(50.8 cm) above the floor where dishwasher will be installed. It
is recommended
that the drain hose be looped up and
securely fastened to the underside of the counter.
3.
A. Large spring-type
C. Disposer inlet
clamp
D. Drain trap
B. Drain hose
Insert drain hose through hole cut in cabinet to the front center
of opening where drain connection will be made.
L
A
A. Drain hose
Option 4: No Waste Disposer - no air gap
1. Cut end of drain hose if needed (do not cut ribbed section).
2.
I
I
A. Drain hose but here if needed)
Attach drain hose to waste tee with 11/2"to 2" (3.8 to 5 cm)
screw-type clamp**.
This connection must be before the drain trap and at least 20"
(50.8 cm) above the floor where dishwasher will be installed. It
is recommended
that the drain hose be looped up and
securely fastened to the underside of the counter.
3.
A. Waste tee
D. Drain hose
B. Drain trap
E. Drain hose (cut
C. Screw-type
clamp
here if needed)
Insert drain hose through hole cut in cabinet to the front center
of opening where drain connection will be made.
A. Drain hose
**Parts available from local plumbing supply stores.