IKEA KALLBODA Podręcznik - Strona 10

Przeglądaj online lub pobierz pdf Podręcznik dla Zmywarka IKEA KALLBODA. IKEA KALLBODA 16 stron.

Drukuj stronę

Adding special salt

If the special salt refill indicator lights up, add special salt to

the dispenser for special salt just before the programme

starts.

ATTENTION!

Detergent may damage the water softening system.

●

Only fill the dispenser of the water softening system

●

with special dishwasher salt.

Special salt can damage the tub due to corrosion.

●

To make sure that any special salt that escapes is

●

washed out of the tub, add the special salt to the dis-

penser for special salt immediately before the pro-

gramme starts.

→ Fig.

Overview of water hardness settings

You can find an overview of the water hardness values that can be selected here.

WATER HARDNESS °E

0 - 8

9 - 10

11 - 12

13 - 15

16 - 20

21 - 26

27 - 38

39 - 62

Regeneration of the water softening sys-

tem – overview

In order to ensure fault-free operation of the water soften-

ing system, the water softening system is regenerated in all

programmes before the end of the main rinse cycle.

Here, you can find an overview of the maximum additional

running time and consumption values during regeneration

of the water softening system. You can find the column ap-

plicable to your product variant according to its water con-

sumption in the Eco 50° programme.

Regeneration of the water softening system

after x washing programmes

Additional running time in minutes

Additional water consumption in litres

Additional power consumption in kWh

The consumption values specified are laboratory measure-

ments determined in accordance with the currently applic-

able standard using the Eco 50° programme and with the

factory value of the water hardness set to 16 - 20°E .

Control panel

You can use the control panel to configure all functions of

Control panel

your appliance and to obtain information about the operat-

ing status.

→ Fig.

HARDNESS RANGE

Soft

Medium

Hard

0.05

To download the full document, visit www.ikea.com

Adding rinse aid

If the rinse aid refill indicator lights up, top up with rinse aid.

Only use rinse aid for domestic dishwashers.

→ Fig.

Setting water softening system

Set the water hardness on your appliance.

→ Fig.

MMOL/L

0 - 1.1

1.2 - 1.4

1.5 - 1.8

1.9 - 2.1

2.2 - 2.9

3.0 - 3.7

3.8 - 5.4

5.5 - 8.9

Setting the amount of rinse aid

If there are streaks or water marks on tableware, change the

amount of rinse aid.

Note: A low level adds less rinse aid during the wash cycle, a

higher setting adds more rinse aid during the wash cycle.

→ Fig.

Detergent

Only use detergents that are suitable for dishwashers. Both

separate and combined detergents are suitable.

For optimum washing and drying results, use separate de-

tergent, adding special salt and rinse aid separately.

Note: Follow the manufacturer's instructions for each deter-

gent.

If you are using tablets, one is enough. Insert the tablets in a

horizontal position.

If you are using powder or liquid detergent, follow the man-

ufacturer's instructions and quantities for dosage in the de-

tergent dispenser.

20 ml – 25 ml detergent is sufficient for normal soiling. If

tableware is only lightly soiled, slightly less than the amount

of detergent specified is usually sufficient.

SETTING VALUE

H00

H01

H02

H03

H04

H05

H06

H07