2. Select the wash program, press the START/PAUSE
DELAY
button and within 4 seconds close the door: the timer
The start time of the program may be delayed for a period
ENGLISH
will begin counting down.
of time between 1 and 12 hours.
3. Once this time has elapsed, the indicator light «h»
1. Press the DELAY button: the corresponding «h» symbol
switches off and the wash cycle begins.
FRANÇAIS
DELAY
appears on the display; each time you press the button,
To adjust the delay time and select a shorter period of time,
The start time of the program may be delayed for a period
the time (1h, 2h, etc. up to max. 12h) from the start of
press the DELAY button. To cancel it, press the button
of time between 1 and 12 hours.
the selected wash cycle will be increased.
repeatedly until the selected delayed start indicator light
1. Press the DELAY button: the corresponding «h» symbol
2. Select the wash program, press the START/PAUSE
«h» switches off.
DELAY
appears on the display; each time you press the button,
button and within 4 seconds close the door: the timer
The DELAY function cannot be set once a wash cycle
Tableau des programmes
The start time of the program may be delayed for a period
the time (1h, 2h, etc. up to max. 12h) from the start of
will begin counting down.
has been started.
of time between 1 and 12 hours.
the selected wash cycle will be increased.
3. Once this time has elapsed, the indicator light «h»
1. Press the DELAY button: the corresponding «h» symbol
2. Select the wash program, press the START/PAUSE
switches off and the wash cycle begins.
appears on the display; each time you press the button,
button and within 4 seconds close the door: the timer
To adjust the delay time and select a shorter period of time,
the time (1h, 2h, etc. up to max. 12h) from the start of
will begin counting down.
press the DELAY button. To cancel it, press the button
3. Once this time has elapsed, the indicator light «h»
the selected wash cycle will be increased.
repeatedly until the selected delayed start indicator light
Programme
2. Select the wash program, press the START/PAUSE
switches off and the wash cycle begins.
«h» switches off.
button and within 4 seconds close the door: the timer
The DELAY function cannot be set once a wash cycle
To adjust the delay time and select a shorter period of time,
will begin counting down.
press the DELAY button. To cancel it, press the button
has been started.
3. Once this time has elapsed, the indicator light «h»
repeatedly until the selected delayed start indicator light
Eco
switches off and the wash cycle begins.
1
«h» switches off.
1 Eco
To adjust the delay time and select a shorter period of time,
The DELAY function cannot be set once a wash cycle
press the DELAY button. To cancel it, press the button
has been started.
Conventional
2
repeatedly until the selected delayed start indicator light
wash and dry
2 Lavage rapide 40'
«h» switches off.
The DELAY function cannot be set once a wash cycle
Intensive
3
has been started.
Eco
1
3 Intensif
Fast
4
Conventional
2
Sanitizing
5
wash and dry
Eco
1
4 Mixte
3
Intensive
Pre-Wash
6
Conventional
2
wash and dry
Eco
1
5 Verre
Fast
4
Self-Clean
7
Intensive
3
Conventional
2
Sanitizing
5
wash and dry
Fast
4
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Les données du programme Éco sont mesurées sous des conditions en laboratoire conformément à la norme européenne EN 60436:2020.
Intensive
3
Pre-Wash
Note pour les laboratoires d'essais : Pour obtenir des informations sur les conditions de tests comparatifs EN, merci d'envoyer un courriel à
6
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Sanitizing
l'adresse suivante :
5
Pre-treatment of the dishes is not needed before any of the programs.
Fast
4
Self-Clean
7
*) Not all options can be used simultaneously.
Aucun prétraitement de la vaisselle n'est nécessaire avant l'un quelconque des programmes.
Pre-Wash
6
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
*) Les valeurs indiquées pour des programmes différents du programme éco sont fournies à titre indicatif uniquement. Le temps réel peut
Sanitizing
5
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
varier selon des facteurs comme la température et la pression de l'eau, la température de la pièce, la quantité de détergent, la quantité et le
load, load balancing, additional selected options and sensor calibration.
Self-Clean
7
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
type de vaisselle, l'équilibre de la charge, les options supplémentaires sélectionnées, et la calibration du capteur.
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Pre-Wash
6
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
1. ECO - Le programme Éco est adapté pour nettoyer de la vaisselle normalement sale, et pour cette utilisation, il est le programme le plus
PROGRAMS DESCRIPTION
efficace en termes de consommation d'énergie et d'eau combinée, et il est utilisé pour évaluer la conformité à la législation européenne en
Pre-treatment of the dishes is not needed before any of the programs.
Self-Clean
7
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
matière d'éco-conception.
*) Not all options can be used simultaneously.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
2. LAVAGE RAPIDE 40' - Programme pour une quantité limitée de vaisselle normalement sale. Assure un nettoyage impeccable en très peu de
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
temps.
Pre-treatment of the dishes is not needed before any of the programs.
load, load balancing, additional selected options and sensor calibration.
3. INTENSIF - Programme conseillé pour la vaisselle très sale, surtout les poêles et les casseroles (ne pas utiliser pour la vaisselle délicate).
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
*) Not all options can be used simultaneously.
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
4. MIXTE - Saleté mixte. Pour la vaisselle normalement sale avec des résidus de nourriture secs.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
5. VERRE - Programme pour vaisselle délicate, plus sensible aux températures élevée,s comme les verres et les tasses.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
PROGRAMS DESCRIPTION
Pre-treatment of the dishes is not needed before any of the programs.
load, load balancing, additional selected options and sensor calibration.
*) Not all options can be used simultaneously.
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
PROGRAMS DESCRIPTION
load, load balancing, additional selected options and sensor calibration.
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Modifier un programme en cours
PROGRAMS DESCRIPTION
Si vous avez sélectionné le mauvais programme, vous pouvez le changer si c'est fait au début du cycle : ouvrir la porte, appuyer sur le bouton «
MARCHE/ARRÊT » et le maintenir enfoncé, la machine s'éteindra. Rallumez l'appareil en appuyant sur la touche MARCHE/ARRÊT et sélectionnez
le nouveau cycle de lavage et les options désirées ; Lancez le cycle de lavage en appuyant sur le bouton « START/Pause » et en fermant la porte
dans les 4 sec.
Si cela prend plus de 4 secondes, l'appareil se met automatiquement en pause et vous devez redémarrer l'appareil en répétant la dernière
opération.
Ajouter de la vaisselle
Sans éteindre l'appareil, ouvrez la porte (le voyant DÉPART/Pause commence à clignoter) (attention à la vapeur CHAUDE !) et placez la
vaisselle à l'intérieur du lave-vaisselle. Appuyer sur le bouton MARCHE/Pause et fermer la porte dans les 4 sec, le cycle reprendra à l'endroit où il
a été interrompu.
Interruptions imprévues
Si la porte est ouverte durant le cycle de lavage, ou s'il y a une panne de courant, le cycle s'interrompt. Appuyer sur le bouton MARCHE/Pause et
fermer la porte dans les 4 sec, le cycle reprendra à l'endroit où il a été interrompu.
Phase de
séchage
Program
50°
50°
55°
45°
-
Program
65°
50°
65°
Program
-
50°
55°
65°
50°
55°
Program
65°
-
-
55°
50°
45°
-
50°
-
65°
65°
55°
65°
-
50°
65°
-
-
65°
-
50°
-
65°
-
-
65°
65°
-
-
-
-
65°
Pour télécharger la version complète, consulter le site www.ikea.com
As additional steam protection, special designed protection foil is
added together with the dishwasher. To see how to mount protec-
tion foil please refer to (INSTALLATION GUIDE).
NaturalDry
NaturalDry functionality could be disabled by the user as follows:
1. Go to the Dishwasher software menu pressing and holding
Door opening system NaturalDry is a convection drying system
button (6 sec).
which automatically opens the door during/after drying phase to
2. You switched to NaturalDry Control Menu, you could change
ensure exceptional drying performance every day. Door opens at
NaturalDry
status of NaturalDry functionality by pressing
the temperature that is safe to your kitchen furniture.
E
d
– enabled
As additional steam protection, special designed protection foil is
Door opening system NaturalDry is a convection drying system
To confirm the change and exit from the Control Menu please
added together with the dishwasher. To see how to mount protec-
which automatically opens the door during/after drying phase to
press and hold
button (3 sec).
tion foil please refer to (INSTALLATION GUIDE).
ensure exceptional drying performance every day. Door opens at
NaturalDry
NaturalDry functionality could be disabled by the user as follows:
the temperature that is safe to your kitchen furniture.
1. Go to the Dishwasher software menu pressing and holding
Door opening system NaturalDry is a convection drying system
As additional steam protection, special designed protection foil is
button (6 sec).
which automatically opens the door during/after drying phase to
added together with the dishwasher. To see how to mount protec-
Durée du
2. You switched to NaturalDry Control Menu, you could change
tion foil please refer to (INSTALLATION GUIDE).
ensure exceptional drying performance every day. Door opens at
programme de
Duration of
NaturalDry functionality could be disabled by the user as follows:
status of NaturalDry functionality by pressing
the temperature that is safe to your kitchen furniture.
lavage
E
d
Available
wash pro-
1. Go to the Dishwasher software menu pressing and holding
– enabled
As additional steam protection, special designed protection foil is
To confirm the change and exit from the Control Menu please
button (6 sec).
(h:min)*)
options
added together with the dishwasher. To see how to mount protec-
gram
*)
2. You switched to NaturalDry Control Menu, you could change
press and hold
button (3 sec).
tion foil please refer to (INSTALLATION GUIDE).
(h:min)
status of NaturalDry functionality by pressing
NaturalDry functionality could be disabled by the user as follows:
E
d
– enabled
1. Go to the Dishwasher software menu pressing and holding
3:35
To confirm the change and exit from the Control Menu please
button (6 sec).
press and hold
button (3 sec).
2. You switched to NaturalDry Control Menu, you could change
Duration of
status of NaturalDry functionality by pressing
E
d
Available
wash pro-
– enabled
0:40
To confirm the change and exit from the Control Menu please
options
gram
*)
-
press and hold
button (3 sec).
(h:min)
Duration of
Available
wash pro-
2:40
-
options
gram
*)
(h:min)
Duration of
-
Available
wash pro-
2:15
options
gram
*)
-
(h:min)
-
1:40
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
button:
– disabled
Consommation
Consommation
button:
d'eau
d'énergie
Water
Energy
– disabled
(litres/cycle)
consumption
consumption
(kWh/cycle)
(litres/cycle)
(kWh/cycle)
**)
button:
– disabled
2:45
12.0
9,5
2:00
15.0
button:
Water
Energy
– disabled
9,0
consumption
consumption
(litres/cycle)
(kWh/cycle)
2:30
15.0
**)
Water
Energy
2:45
12.0
18.0
consumption
consumption
0:55
11.5
(litres/cycle)
(kWh/cycle)
**)
2:00
15.0
Water
Energy
1:40
11.5
2:45
12.0
16,0
consumption
consumption
(litres/cycle)
(kWh/cycle)
2:30
15.0
0:10
**)
4.5
2:00
15.0
2:45
12.0
11,5
0:55
11.5
0:50
8.0
2:30
15.0
2:00
15.0
1:40
11.5
0:55
11.5
2:30
15.0
0:10
4.5
1:40
11.5
0:55
11.5
0:50
8.0
0:10
4.5
1:40
11.5
0:50
8.0
0:10
4.5
0:50
8.0
9
22
0.92
0,95
1.35
0,50
1.50
0.92
1,60
1.10
1.35
1.30
0.92
1,40
1.50
0.01
1.35
0.92
1,20
1.10
0.80
1.50
1.35
1.30
1.10
1.50
0.01
1.30
1.10
0.80
0.01
1.30
0.80
0.01
0.80
Drukuj stronę