Avantco 177SL612A Podręcznik użytkownika - Strona 2
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Urządzenia kuchenne Avantco 177SL612A. Avantco 177SL612A 18 stron. Meat slicer
Również dla Avantco 177SL612A: Podręcznik użytkownika (9 strony)
Drukuj stronę
User Manual
User Manual
Unpacking:
Unpacking:
Unpack the product and check for any damage incurred during transit. This should be reported to the responsible
Unpack the product and check for any damage incurred during transit. This should be reported to the responsible
carrier, railway or postal authority, and a request for a damage report should be made.
carrier, railway or postal authority, and a request for a damage report should be made.
These instructions must be followed for us to guarantee our full support of your claim for
These instructions must be followed for us to guarantee our full support of your claim for
!
!
protecting against loss from concealed damage. The form for filing such a claim will be
protecting against loss from concealed damage. The form fo
provided by the carrier.
provided by the carrier.
General Installation And Operation
General Installation And Operation
Instructions:
Instructions:
The Avantco Auto/ Manual slicer is a medium duty electrically driven appliance. The unit has been designed to
The Avantco Auto/ Manual slicer is a medium duty electrically driven appliance. The unit has been designed to
meet the highest safety and hygiene standards. The robust aluminum construction and powerful drive motors ensure
meet the highest safety and hygiene standards. The robust aluminum construction and powerful drive motors ensure
long and reliable operation and use. These units are suitable for slicing frozen meats.
long and reliable operation and use. These units are suitable for slicing frozen meats.
1. Place the unit in the desired location with the on/off switch facing the operator. DO NOT plug the unit in at this point.
1. Place the unit in the desired location with the on/off switch facing the operator. DO NOT plug the unit in at this point.
The supporting table should be stable and at the correct working height. The work surface should be in a dry loca-
The supporting table should be stable and at the correct working height. The work surface should be in a dry loca-
tion and preferably away from heavy traffic areas.
tion and preferably away from heavy traffic areas.
2. Clean the unit with a DAMP cloth using a neutral P.H. dish detergent. Wipe and dry the machine. (See Cleaning
2. Clean the unit with a DAMP cloth using a neutral P.H. dish detergent. Wipe and dry the machine. (See Cleaning
instructions on page 3 of this manual.)
instructions on page 3 of this manual.)
3. Set the thickness of slice required using the control knob adjacent to the on/off switch.
3. Set the thickness of slice required using the control knob adjacent to the on/off switch.
4. The meat support platform should be in the start position that is close to the operator. Lift up the food pusher; place
4. The meat support platform should be in the start position that is close to the operator. Lift up the food pusher; place
the meat to be sliced on the support platform against the raw edge. Return the food pusher to its original position
the meat to be sliced on the support platform against the raw edge. Return the food pusher to its original position
now on top of the meat to be sliced.
now on top of the meat to be sliced.
5. The unit can be operated in either MANUAL or AUTO feed modes.
5. The unit can be operated in either MANUAL or AUTO feed modes.
5.1. MANUAL MODE.
5.1. MANUAL MODE.
Ensure the control lever H in diagram 1 is position A. This handle disengages
Ensure the control lever H in diagram 1 is position A. This handle disengages
auto feed function.
auto feed function.
Switch on the blade motor only and using the handle on the food pusher,
Switch on the blade motor only and using the handle on the food pusher,
push the carraige back and forth to begin cutting the food.
push the carraige back and forth to begin cutting the food.
5.1. AUTO FEED MODE.
5.1. AUTO FEED MODE.
Ensure the control lever H in diagram 1 is position B. This handle engages
Ensure the control lever H in diagram 1 is position B. This handle engages
the auto feed function.
the auto feed function.
Switch on the blade motor first and then auto feed motor. The unit will now
Switch on the blade motor first and then auto feed motor. The unit will now
automatically cut the meat loaded.
automatically cut the meat loaded.
6. After you are finished cutting, turn off machine and collect the product slices in the exit area.
6. After you are finished cutting, turn off machine and collect the product slices in the exit area.
2
2
Cut through the greasiest dishes, glassware, cutlery, pots, and pans with
Cut through the greasiest dishes, glassware, cutlery, pots, and pans with
Sunbright 32 oz. pot and pan dishwashing liquid. This heavy-duty pot and pan
Sunbright 32 oz. pot and pan dishwashing liquid. This heavy-duty pot and pan
dishwashing liquid was specially designed for the institutional environment with
dishwashing liquid was specially designed for the institutional environment with
its super concentrated, high active, high sudsing formula.
its super concentrated, high active, high sudsing formula.
ling such a claim will be
Diagram 1
Diagram 1
B
B
A
A
www.AvantcoEquipment.com
www.AvantcoEquipment.com
H
H