Avantco 178UDD3HCS Podręcznik użytkownika - Strona 4
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Urządzenia kuchenne Avantco 178UDD3HCS. Avantco 178UDD3HCS 19 stron. Beer dispensers
Również dla Avantco 178UDD3HCS: Podręcznik użytkownika (19 strony), Podręcznik użytkownika (19 strony)
Drukuj stronę
User Manual
Installation & Operation
Uncrating
If the unit has recently been transported on its side, please let the unit stand upright for a
minimum of 24 hours before plugging it in.
1. Remove the outer packaging. All of the packaging (including cardboard, bubbles and plastic
wrap) should be removed from the unit.
2. Move the unit as close to the final location as possible before removing the wooden pallet.
3. Use a screwdriver to remove the screws
from the L-bracket connecting the unit to
the wooden pallet.
4. Remove pallet by unscrewing all base rail
anchor brackets. Place pallet to the side.
5. Carefully upright the cabinet.
Caution: When lifting unit
!
do not use the countertop
as a lifting point.
Locating
- Install the unit on strong and level surfaces, keep the cooler
stable to avoid vibration and noise.
- Install the unit in an indoor, well-ventilated area. A space of at
least 3" should be allowed between the surrounding walls and the
cabinet wall for air circulation.
- Unit should be placed far from any heating source to avoid
decrease of refrigeration efficiency.
- Install the cooler in a dry place to prevent rust from forming on
the compartment body, which may affect electrical insulation.
- The appliance shall not be exposed to rain or sun. Outdoor use
may cause decrease in efficiency and damage to the unit.
- The unit should be placed close enough to the electrical outlet
so that extension cords are never used.
Caution: Problems caused by improper
!
position of units are not covered by warranty
- 4 -