IKEA SKINANDE Podręcznik użytkownika - Strona 19

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Zmywarka IKEA SKINANDE. IKEA SKINANDE 48 stron. Dishwasher
Również dla IKEA SKINANDE: Podręcznik użytkownika (24 strony), Podręcznik (24 strony), Podręcznik użytkownika (4 strony), Podręcznik (48 strony), Podręcznik (16 strony), Podręcznik (32 strony), Instrukcja instalacji (16 strony), Podręcznik (28 strony), Podręcznik (28 strony), Podręcznik (48 strony)

Drukuj stronę

ENGLISH

Problem and alarm code

The appliance does not fill

with water.

The display shows

The appliance does not

drain the water.

The display shows

The anti-flood device is on.

The display shows

The salt indicator continues

to stay on after replenish-

ment of the salt container.

Once you have checked the appliance,

deactivate and activate the appliance. If

the problem occurs again, contact an

Authorised Service Centre.

The washing and drying results are not satisfactory

Problem

There are whitish streaks or

bluish layers on glasses and

dishes.

There are stains and dry wa-

ter drops on glasses and

dishes.

• Make sure that the water tap is open.

• Make sure that the pressure of the water supply is not

too low. For this information, contact your local water

authority.

• Make sure that the water tap is not clogged.

• Make sure that the filter in the inlet hose is not clogged.

Clean the filter.

• Make sure that the inlet hose has no kinks or bends.

• Make sure that the sink spigot is not clogged.

• Make sure that the drain hose has no kinks or bends.

• Close the water tap and contact an Authorised Service

Centre.

• If after 3 or 4 programmes, the salt indicator continues to

stay on, contact the service.

This can occur when you are using salt that needs more

time to dissolve.

There in no unwanted effect on the performance of the

appliance.

• The release quantity of rinse aid is too much. Adjust

the rinse aid selector to a lower position.

• The quantity of detergent is too much.

• The released quantity of rinse aid is not sufficient. Ad-

just the rinse aid selector to a higher position.

• The quality of the rinse aid can be the cause.

Possible solution

For alarm codes not described in the table,

contact an Authorised Service Centre.

Possible solution