IKEA VILLKORLIG Podręcznik - Strona 18
Przeglądaj online lub pobierz pdf Podręcznik dla Zmywarka IKEA VILLKORLIG. IKEA VILLKORLIG 23 stron.
TROUBLESHOOTING
PROBLEM
Dishes not
dry enough
Spots and film on
dishes
Etching
Detergent left in
dispenser
cup
Detergent
dispenser will not
shut
Water remains in
the dishwasher
Dishwasher
does not drain
properly
Suds in the tub
Dishwasher leaks
Black or gray
marks on dishes
18
POSSIBLE CAUSES
•
Rinse aid dispenser
is empty.
•
Improper loading of
dishes.
•
The cycle you chose
did not included the
drying.
•
Water hardness is
too high.
•
Improper loading of
dishes.
•
Old rinse aid is
used.
•
Rinse dispenser
empty.
•
Using too much
detergent.
•
The inlet water
temperature
exceeds 158°F
(70°C).
•
Detergent may be
too old.
•
Spray arm is
blocked.
•
Improper operation
of the detergent
cover.
•
Previous cycle has
not finished or has
been interrupted.
•
Drain is clogged.
•
Drain hose is
kinked.
•
Improper detergent
is used.
•
Excessive suds
caused by using
the improper
detergent.
•
Dishwasher is not
level.
•
Aluminum utensils
have rubbed
against dishes.
SOLUTIONS
•
Fill rinse aid dispenser or increase
the amount of rinse aid.
•
Load the dishes again as the
manual instructs.
•
Choose the proper cycle with
drying.
•
For extremely hard water install a
water softener.
•
Load the dishes again as the
manual indicates.
•
Use fresh rinse aid.
•
Add rinse aid to the dispenser.
•
Use less detergent if you have soft
water.
•
Lower the inlet water temperature.
•
Use fresh detergent.
•
Load the dishes, making sure the
spray arms are not blocked.
•
Add the detergent and rinse aid as
indicated by the manual.
•
Select the proper cycle explained
in the manual.
•
Check the air gap if you have one.
Make sure the disposer is empty
if dishwasher is connected to
disposer.
•
Make sure the drain hose is
properly connected to the sink.
•
Make sure to use only the
automatic dishwasher detergent.
•
Make sure to use only the proper
dishwasher detergent.
•
Level the dishwasher.
•
Rearrange the dishes.
EN