Avantco 177IDIW375 Podręcznik użytkownika - Strona 11
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Podgrzewacz do żywności Avantco 177IDIW375. Avantco 177IDIW375 13 stron. Induction buffet warmers
Drukuj stronę
Selection of Cookware
Suitable cookware
It is important that the heat conductance of the cookware is extremely high to guarantee a constant heat distribution.
The bottom of the cookware used with the induction plate must be magnetic (ferromagnetic). Recommended for use
with enameled pots made of magnetic steel, roasting tins made of cast iron, or special stainless steel cookware with
a special steel "sandwich" bottom. The specialized trade sells suitable cookware. All cookware with a spiral symbol
engraved into its bottom is suitable.
Tip: Test with a magnet if the cookware you plan to use is suitable for induction cooking.
Note: Do not use cookware made of glass, ceramic, or aluminum. This kind of cookware is not suited for use
with induction cooking plate.
1. Material required: Please use only induction compatible cookware made of steel, cast iron, enameled iron, stainless
steel, or flat-bottom pans/pots/chafers with diameter/width from 4½" to 13" x 15" (half) and 13" x 22" (full).
Note: these units are intended to be used with full size and 2/3 size induction-ready chafers.
2. Pans/Pots/Utensils should have a flat surface. Do not try to use any other kind of utensils or vessels (especially
pressure sensor vessels).
3. While buying your cookware, look for an "Induction Compatible" sign or wording to ensure it will work with this
cooktop.
When the cookware is removed, the device automatically switches into the Standby Mode.
- The device detects whether suitable cookware is placed on the cooking plate. If not, no energy is transmitted.
- When operating the induction cooking plate with empty cookware, a temperature sensor turns off the heating
function in case of overheating.
Maintenance and Daily Care
1. Always keep the unit clean. Avoid dirt getting into the fan or other inner parts of the unit.
2. Before starting to clean the Unit, ensure the Unit is powered off and remove the power plug from socket. Do not clean the
Unit until the surface cools down.
3. Remove grease, dirt, stains, etc. by cleaning the Unit with a clean, soft cloth and mild detergent.
4. The fan in the air vent of the Unit is bound to get dirt stuck on it. Please remove it regularly with a soft brush or cotton stick.
5. Do not immerse the Unit or power cord directly into water or any other liquid to clean it. It will damage the Unit. To protect
the Unit from any kind of power surge, ensure the plug is fit properly into the socket.
www.AvantcoEquipment.com
User Manual
11