GAPOSA QCXSUN Podręcznik - Strona 2

Przeglądaj online lub pobierz pdf Podręcznik dla Pilot zdalnego sterowania GAPOSA QCXSUN. GAPOSA QCXSUN 4 stron.

QCXSUN was developped for all GAPOSA radio motors installed in interior/exterior blinds or roller shutters.

NOTE: Before starting the programming procedure it is necessary to check which interior blind, exterior blinds or

roller shutters will be controlled by the sun sensor.

1. HOW DOES IT WORK

SENSOR OFF. The sensor is completely inactive. It does not measure light intensity nor transmits radio signals.

SENSOR ON. The sensor measures light intensity every 90 seconds (1 flash of the LED).

When the sensor detects an increase in brightness

(above the threshold) it closes the blind/shutter

and stops measuring light intensity for 20 minutes

before starting again every 90 sec.

When the sensor detects a decrease in brightness

(below the threshold) it opens the blind/shutter and

stops measuring light intensity for 1 minute before

starting again every 90 sec

NOTE: When the battery is inserted for the first time , the default factory setting of the sun sensor is OFF with a

threshhold of 1 (low light)

2. FUNCTIONS

led

suction

cup

front

OFF - Disables the sun sensor (1 slow flash)

ON - Activates the sun sensor (3 quick flashes)

SEL - Sun sensibility threshold adjustment

rear