Makita 1806B Instrukcja obsługi - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Elektronarzędzie Makita 1806B. Makita 1806B 13 stron. Power planer
Również dla Makita 1806B: Instrukcja obsługi (17 strony), Podział części (3 strony), Instrukcja obsługi (10 strony), Instrukcja obsługi (13 strony), Instrukcja obsługi (11 strony)

1. Limit mark

1. Chip cover

2. Screwdriver

1. Brush holder cap

2. Screwdriver

Immerse the dressing stone in water for 2 or 3 minutes before sharpening.

002592

Hold the holder so that the both blades contact the dressing stone for simulta-

neous sharpening at the same angle.

Replacing carbon brushes

001145

Remove and check the carbon brushes regularly. Replace when they wear

down to the limit mark. Keep the carbon brushes clean and free to slip in the

holders. Both carbon brushes should be replaced at the same time. Use only

identical carbon brushes.

Use a screwdriver to remove the chip cover.

002595

Use a screwdriver to remove the brush holder caps. Take out the worn carbon

002596

brushes, insert the new ones and secure the brush holder caps.

To maintain product SAFETY and RELIABILITY, repairs, any other mainte-

nance or adjustment should be performed by Makita Authorized Service Cent-

ers, always using Makita replacement parts.