Makita 1923H Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Elektronarzędzie Makita 1923H. Makita 1923H 13 stron. Power planer
Również dla Makita 1923H: Instrukcja obsługi (17 strony), Instrukcja obsługi (18 strony)

Drukuj stronę

For the correct planer blade setting

Your planing surface will end up rough and uneven,

unless the blade is set properly and securely. The blade

must be mounted so that the cutting edge is absolutely

level, that is, parallel to the surface of the rear base.

Refer to some examples below for proper and improper

settings.

(A) Front base (Movable shoe)

(B) Rear base (Stationary shoe)

Correct setting

Nicks in surface

Gouging at start

Gouging at end

EN0004-1

Connecting a vacuum cleaner

For European countries and areas

When you wish to perform clean planing operation,

connect a Makita vacuum cleaner to your tool. Install the

nozzle on the tool using the screws. Then connect a hose

of the vacuum cleaner to the nozzle as shown in the

figures.

004902

1. Chip cover

2. Screwdriver

(A)

(B)

(A)

(B)

(A)

(B)

004951

Although this side view cannot

show it, the edges of the blades

run perfectly parallel to the rear

base surface.

Cause: One or both blades fails to

have edge parallel to rear

base line.

Cause: One or both blade edges

fails to protrude enough in

relation to rear base line.

Cause: One or both blade edges

protrudes too far in relation

to rear base line.

1. Vacuum cleaner