Makita 2012NB Instrukcja obsługi - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Elektronarzędzie Makita 2012NB. Makita 2012NB 20 stron. Thicknesser
Również dla Makita 2012NB: Instrukcja obsługi (13 strony), Instrukcja obsługi (14 strony), Instrukcja obsługi (13 strony), Instrukcja obsługi (17 strony)

Replacing planer blades

CAUTION:

*Always be sure that the tool is switched off and unplugged before removing

installing

*Handle the blades very carefully when removing or installing the blades to prevent cuts or

*Clean out all chips, dust, pitch or foreign matter adhering to the drum or blades before

*Use blades of the same dimensions and weight, or drum oscillation/vibration will result,

*Replace both blades at the same time.

*The disposable-type blade has

cutting edge on both sides. When one cutting edge

becomes dull, you can use the other cutting edge. Always remove resin and dirt sticking

the reverse side of the blade before using the other cutting edge. This blade must not

be re-sharpened. When both cutting edges become dull, the blade should e carefully

the blades.

injury from the blades and to prevent damage to the blades. They are razor-sharp.

installing the blades.

causing poor cutting action and, eventually, tool breakdown.

thrown away.

1. Removing blades

Loosen the thumb screw which secures

the chip cover and remove the chip

cover. Remove the screws which secure

the right side cover. Then remove the

right side cover. Turn the pulley until the

drum can be locked in the position

whereby the blade installation bolts face

upward.

Lock

plate Drum

Thumb screw

Place the two magnetic holders on the set plate and push them in the direction of the

arrow until the claw contact the blade. Remove the six blade installation bolts using the

socket wrench. Grip the magnetic holders and raise them straight up to remove the set

plate and the blade from the drum. Press the lock plate and turn the pulley 180" to lock

the drum. Remove the other blade as described above.

Blade-

-Claw

Socket wrench