CORNING 6795-171 Instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt laboratoryjny CORNING 6795-171. CORNING 6795-171 8 stron.

Drukuj stronę

7.0 Inspection Procedure

Look for etching or chipping on the top plate. If any of these conditions are

present, discontinue use and contact Corning for additional instructions.

Check if the power cord is damaged. If the cord is damaged, do not

modify the grounded power plug to avoid shock hazard or any other unit

component. Service should always be done by qualified technicians using

Corning instructions. Contact Corning for additional instructions.

8.0 Preventive Maintenance

Disconnect power by unplugging the unit before performing any

maintenance or service.

Always use a grounded power outlet.

Keep the top surface clean and dry. Unplug the unit and use non-abrasive

cleaner. Contact Corning if you have any questions about the compatibility

of decontamination or cleaning agents.

Clean spills promptly. If liquid or solid material gets inside the product,

immediately disconnect power to the product, use non-abrasive cleaner,

and discontinue use. Contact Corning for additional instructions regarding

interior spills.

9 .0 Technical Specifications

Cat. No.

Model

6795-170 PC-170 Hot Plate

6797-170 PC-170 Hot Plate

6795-171 PC-171 Stirrer

10.0 Technical Support/Service

If you have a question or a service inquiry about the Corning® Scholar

PC-170 Hot Plates or PC-171 Stirrer, contact Corning Customer Service

immediately at 1.800.492.1110 (United States and Canada), 1.978.442.2200

(outside the United States), or Contact your local Corning sales office.

Before returning any unit for service, a Return Authorization (RA) number

must first be obtained. Equipment sent in without our prior authorization

will be returned at the customer's expense. When returning a unit to

Corning for service, it should be sent in the original packaging. If this is not

possible, be sure that the unit is sufficiently packed. Any damage resulting

from improper packaging is the responsibility of the customer. A written

explanation should accompany the unit along with the RA number.

Power

Temp. Range Stir Range (rpm)

120V, 50-60Hz,

60°C to 360°C

250W, 2.1A

100V, 50-60Hz,

60°C to 360°C

250W, 2.5A

120V, 50-60Hz,

30W, 0.25A

N/A

100 to 1,600

Instruction Manual