CORNING LSE 6783 Instrukcja obsługi - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt laboratoryjny CORNING LSE 6783. CORNING LSE 6783 9 stron. Digital water bath
Również dla CORNING LSE 6783: Instrukcja obsługi (8 strony)
Drukuj stronę
8.0
PRODUCT SPECIFICATIONS
Temperature range
Controls
Chamber maximum load
Exterior dimensions (W x D x H)
Weight
Electrical
Chamber dimensions (W x D x H)
9.0
GETTING STARTED
9.1 Check the data plate for voltage, cycle, wattage, and ampere requirements. If matched
to your power source, plug the power cord into a grounded outlet. Voltage should not
vary more than 10% from the data plate rating.
9.2 In selecting a location, consider all conditions which might affect performance, such as
heat from radiators, autoclaves, etc. Avoid direct sun, fast-moving air currents,
heating/cooling ducts, and high traffic areas. Allow a minimum of 5 cm between the unit
and walls or partitions which might obstruct free airflow.
10.0
IMPORTANT GUIDELINES
Description of front overlay:
POWER – power key shines when water bath is ON
⇑ -- UP key
⇓ -- DOWN key
Display (DOT is blinking when you set temperature)
Ambient +5°C to 99°C
PID control
20 lbs./9.09 kg
14.9 x 11.4 x 9.0 inches (12.9 inches with cover)/
38 x 29 x 23 mm (33 mm with cover)
19 lbs./8.6 kg
120V, 50/60 Hz, 4.8 amps or
230V, 50/60 Hz, 2.4 amps or
12.6 x 6.7 x 6.9 inches/32 x 17 x 18 cm
3