Makita 4131 Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Elektronarzędzie Makita 4131. Makita 4131 14 stron. Metal cutter
Również dla Makita 4131: Instrukcja obsługi (12 strony), Instrukcja obsługi (12 strony), Instrukcja obsługi (12 strony), Instrukcja obsługi (12 strony)

Fig. 5 illustrates the RIGHT way to cut off

the end of a board, and Fig. 6 the WRONG

way. If the workpiece is short or small,

clamp it down. DO NOT TRY TO HOLD

SHORT PIECES BY HAND!

SAVE THESE INSTRUCTIONS

WARNING:

MISUSE or failure to follow the safety rules stated in this

instruction manual may cause serious personal injury.

Fig. 5

Fig. 6

14. Never attempt to saw with the tool held

upside down in a vise. This is extremely

dangerous and can lead to serious acci-

dents.

15. WARNING: Blade coasts to stop after

switch is released. Contact with coasting

blade can cause serious injury. Before

setting the tool down after completing a

cut, be sure that the lower (telescoping)

guard has closed and the blade has come

to a complete stop.

16. Wear safety goggles and hearing protec-

tion during operation.

Fig. 7