Makita 4131 Instrukcja obsługi - Strona 2
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Elektronarzędzie Makita 4131. Makita 4131 12 stron. Metal cutter
Również dla Makita 4131: Instrukcja obsługi (12 strony), Instrukcja obsługi (14 strony), Instrukcja obsługi (12 strony), Instrukcja obsługi (12 strony)
Drukuj stronę
ENGLISH
SPECIFICATIONS
Max. cutting capacity
No load speed (min
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
DOUBLE INSULATION
･
Pay attention! It may become too hot.
･
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an
recycling facility.
Intended use
The tool is intended for cutting in mild steel.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Wear ear protection
Model
Balde diameter
-1
)
Overall length
Net weight
Safety class
equipment
environmentally
) : 99 dB(A)
pA
) : 110 dB(A)
WA
END209-3
Vibration
The
vibration
determined according to EN60745:
Work mode : cutting steel pipe
Vibration emission (a
Uncertainty (K) : 1.5 m/s
For European countries only
EC Declaration of Conformity
We
Makita
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Metal Cutter
Model No./ Type: 4131
and
its
are of series production and
Conforms to the following European Directives:
98/37/EC until 28th December 2009 and then with
2006/42/EC from 29th December 2009
And are manufactured in accordance with the following
compatible
standards or standardised documents:
EN60745
ENE022-1
The technical documentation is kept by our authorised
representative in Europe who is:
Makita International Europe Ltd,
ENF002-1
Michigan, Drive, Tongwell,
Milton Keynes, MK15 8JD, England
000230
ENG102-3
2
4131
185 mm
63 mm
3,500
358 mm
5.1 kg
/II
total
value
(tri-axial
2
) : 2.5 m/s
h
2
Corporation
as
the
30th January 2009
Tomoyasu Kato
Director
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, JAPAN
ENG241-1
vector
sum)
or less
ENH101-13
responsible