Makita 4300BV Instrukcja obsługi - Strona 8
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Elektronarzędzie Makita 4300BV. Makita 4300BV 12 stron.
Również dla Makita 4300BV: Instrukcja obsługi (13 strony)
![Makita 4300BV Instrukcja obsługi](/uploads/products/server2/2090699/2090699.png)
Finishing edges
005936
To trim edges or make dimensional adjustments, run the
blade lightly along the cut edges.
For smoother cutting of plywood or other workpiece with
easily splintered surfaces, transparent tape may be used
over your cutting line.
Metal cutting
005937
Always use a suitable coolant (cutting oil) when cutting
metal. Failure to do so will cause significant blade wear.
The underside of the workpiece can be greased instead
of using a coolant.
1
005938
MAINTENANCE
CAUTION:
Always be sure that the tool is switched off and
•
unplugged before attempting to perform inspection
or maintenance.
1. Cutting oil
1
1. Grease
Replacing carbon brushes
001145
Remove and check the carbon brushes regularly.
Replace when they wear down to the limit mark. Keep
the carbon brushes clean and free to slip in the holders.
Both carbon brushes should be replaced at the same
time. Use only identical carbon brushes.
Use a screwdriver to remove the brush holder caps.
Take out the worn carbon brushes, insert the new ones
and secure the brush holder caps.
005939
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be
performed by Makita Authorized Service Centers,
always using Makita replacement parts.
ACCESSORIES
CAUTION:
These
accessories
•
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to
persons.
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
Jig saw blades
•
Hex wrench 3
•
Rip fence (Guide rule)
•
Circular guide
•
Dust cover set
•
8
1. Limit mark
1
1. Screwdriver
2. Brush holder
cap
1
2
or
attachments
Only use
accessory or
are