CORNING Matribot Bioprinter Instrukcja obsługi - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt laboratoryjny CORNING Matribot Bioprinter. CORNING Matribot Bioprinter 8 stron. Demonstration equipment
Również dla CORNING Matribot Bioprinter: Skrócona instrukcja obsługi (2 strony)
Drukuj stronę
8. Remove the top shipping foam from the shipping box, and confirm that the bottom
shipping foam is positioned as below.
NOTE: The bottom shipping foam has a cutout for the LCD knob on the Corning®
Matribot® bioprinter (see red arrow).
9. Use the Corning Matribot bioprinter frame to grab the device. Be careful not to grab
any movable parts or loose components. It is recommended to have 2 people lift from
the sides of the frame at the indicated location. Carefully place the bagged Corning
Matribot bioprinter into the bottom shipping foam, ensuring the LCD knob goes into
the foam cutout.
10. Place the top shipping foam onto the
top of the Corning Matribot bioprinter,
encapsulating the unit in the box.
11. Place the empty consumables box on top of the shipping foam above the
Corning Matribot bioprinter and place the electrical supply box in the foam
insert next to the Corning Matribot bioprinter.
12. Attach the return shipping label (provided in the consumables box), and remove or mark out any previous shipping labels. Secure the
shipping box by folding the top flaps and taping it shut.
6