CORNING PC-600D Instrukcja obsługi - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt laboratoryjny CORNING PC-600D. CORNING PC-600D 14 stron. Digital hot plates, stirring hot plates, stirrers, and external temperature controller
Również dla CORNING PC-600D: Instrukcja obsługi (11 strony), Instrukcja obsługi (8 strony), Instrukcja obsługi (14 strony)

Drukuj stronę

8.0 Repair

There are no direct user serviceable components inside this series of products.

Please contact Corning or a Corning authorized repair facility for repair or maintenance issues.

9.0 Maintenance

Power

CAUTION: Disconnect power to the product by unplugging the power cord before

performing any maintenance or inspection procedures.

Inspect the power cord regularly and replace if damaged. Use only replacement power

cords available from Corning or Corning authorized product distributors.

Ceramic Top Plate

These products are supplied with a Pyroceram® top that is easy to clean and highly

resistant to scratches, corrosion, and chemical attack.

The ceramic top may break during use if not properly maintained.

Keep the ceramic top clean. A nonabrasive cleaner may be used to clean the ceramic top.

Inspect the ceramic top for damage during cleaning.

Discontinue product use if the ceramic top is chipped, etched, or shows excessive

scratching.

Contact Corning or a Corning authorized repair facility for a top replacement.

General

It is important to keep this product dry and clean.

Remove minor exterior liquid spills promptly.

Clean exterior surfaces with a nonabrasive cleaner. Do not reconnect product to power

input until all cleaned surfaces have dried.

If liquid or wet solid material gets inside the product, immediately disconnect the power

to the product and discontinue use. Contact Corning for additional instructions regarding

interior spills.

Instruction Manual