Makita 4323 Instrukcja obsługi - Strona 10
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Elektronarzędzie Makita 4323. Makita 4323 17 stron. Makita 4323 jig saw: specifications
Również dla Makita 4323: Instrukcja obsługi (2 strony), Instrukcja obsługi (19 strony)
Drukuj stronę
Steel base type
1
1. Rip fence (Guide rule)
Aluminum base type
1. Rip fence(Guide rule)
Steel base type
2
3
1. Hex wrench
2. Bolt
3. Rip fence (Guide rule)
4. Guide facing
Aluminum base type
1
2
1. Bolt
2. Fence guide
3. Hex wrench
4. Rip fence(Guide rule)
10
Rip fence (optional accessory)
CAUTION:
•
Always be sure that the tool is switched off and unplugged before
installing or removing accessories.
1.
Straight cuts
002773
When repeatedly cutting widths of 160 mm or less, use of the rip fence
will assure fast, clean, straight cuts.
005852
1
To install, insert the rip fence into the rectangular hole on the side of the
002774
base with the fence guide facing down. Slide the rip fence to the desired
cutting width position, then tighten the bolt to secure it.
1
4
005853
3
4